Quality and Service in Priority
METAL WALL ANCHORS, NYLON & PLASTIC PLUG, SCREWS
:Expansion Anchors & Fixing Systems
:Expansion Anchors & Fixing Systems
:Expansion Anchors & Fixing Systems
EXPANSION ANCHOR & FIXING SYSTEM
COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
:Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
:Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
:Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
: Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
: Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
: Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
: Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
: Expansion Wall Anchors
: Expansion Wall Anchors
Guider tool - for decking screw
:Guider tool - for decking screw
:Guider tool - for decking screw
:Guider tool - for decking screw
Organizing assortment
:Organizing assortment
:Organizing assortment
:Organizing assortment
Concrete screw
:Concrete screw
:Concrete screw
:Concrete screw
Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
:Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
:Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
:Expansion Wall Anchors & FIXING SYSTEM COLD FORGED WEDGE ANCHOR, HEX HEAD CONCRETE SCREW, FLAT HEAD CONCRETE SCREW, HOLLOW WALL ANCHOR
Expansion Wall Anchors
:Expansion Wall Anchors
:Expansion Wall Anchors
:Expansion Wall Anchors
Expansion Wall Anchors
MATERIAL: STEEL
SIZE OF SCREW: M4, M5, M6, M8
WITH PAN HEAD SCREW.
WITH C HOOK, O HOOK, L HOOK ALSO AVAILABLE.
BODY SHELLS CAN BE SUPPLIED SEPARATELY.
-- ONE-PIECE TYPE, STAMPING HEAD & NUT AUTOMATICALLY.
-- FAST DELIVERY TIME.
:NO.105 HOLLOW WALL ANCHOR (ONE-PIECE TYPE)
:NO.105 HOLLOW WALL ANCHOR (ONE-PIECE TYPE)
:NO.105 HOLLOW WALL ANCHOR (ONE-PIECE TYPE)
MATERIAL: STEEL AND STAINLESS STEEL
METRIC SIZE: M6, M8, M10, M12, M14, M16, M20
UNC SIZE: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”
ASSEMBLED WITH HEX NUT & WASHER
ALTERNATIVES: STUD MADE BY TURNING OR COLD FORGED.
:NO.302 WEDGE ANCHOR (THROUGH BOLT)
:NO.302 WEDGE ANCHOR (THROUGH BOLT)
:NO.302 WEDGE ANCHOR (THROUGH BOLT)
Material: steel, zinc plated or yellow z/p or mechanical galvanized.
Size: 10x75, 10x100, 10x130, 10x150, 12x75, 12x100, 12130, 12x150, 16x100, 16x150
Head type: Hex flange head / coupler type (inner thread hole in head)
Installed by electrical power tool, don’t need to use hammer or spanner, in order to save time.
Replace the traditional steel wall anchor.
:NO.716 CONCRETE SCREWBOLT
:NO.716 CONCRETE SCREWBOLT
:NO.716 CONCRETE SCREWBOLT
Material: Stainless steel or steel (zinc plated or yellow z/p)
Size: Diameter 7.5mm / Length: from 42mm to 300mm
Head type: Flat head or Round head
The Countersunk Concrete Masonry Screw is suitable for fixing into concrete, stone, lightweight concrete and sandstone.
:NO.709 CONCRETE SCREW
:NO.709 CONCRETE SCREW
:NO.709 CONCRETE SCREW
MATERIAL: STEEL
SIZE OF SCREW: M4, M5, M6, M8
WITH PAN HEAD SCREW.
WITH C HOOK, O HOOK, L HOOK ALSO AVAILABLE.
BODY SHELLS CAN BE SUPPLIED SEPARATELY.
:NO.101 HOLLOW WALL ANCHOR (WELDING TYPE)
:NO.101 HOLLOW WALL ANCHOR (WELDING TYPE)
:NO.101 HOLLOW WALL ANCHOR (WELDING TYPE)
*EASY TO USE. ONLY USE ELECTRICAL TOOL TO INSTALL.
:NO.101SD SELF DRILL HOLLOW WALL ANCHOR
:NO.101SD SELF DRILL HOLLOW WALL ANCHOR
:NO.101SD SELF DRILL HOLLOW WALL ANCHOR
MATERIAL: STEEL AND STAINLESS STEEL
METRIC SIZE: O.D. 8mm, 10mm, 12mm, 16mm, 20mm
UNC SIZE: O.D.1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”
:NO.301 SLEEVE ANCHOR
:NO.301 SLEEVE ANCHOR
:NO.301 SLEEVE ANCHOR
MATERIAL: STEEL AND STAINLESS STEEL
SIZES: O.D. 8mm, 10mm, 12mm, 16mm, 20mm
UNC SIZE ANCHOR BOLTS ARE AVAILABLE.
HEX BOLT: 4.6 GRADE, 5.8 GRADE OR 8.8 GRADE
:NO.301HB SLEEVE ANCHOR WITH HEX BOLT
:NO.301HB SLEEVE ANCHOR WITH HEX BOLT
:NO.301HB SLEEVE ANCHOR WITH HEX BOLT
MATERIAL: STEEL
SIZE: 6 X 35mm, 6 X 65mm
APPLIED TO CONCRETE ROOF FOR FIXING OBJECTS QUICKLY.
EASY TO USE BY HAMMER – NO MISS AND FAILURE BY FIXING OBJECTS
GOOD PULL-OUT VALUE AFTER FIXING.
HIT BY HAMMER; EASY TO INSTALL.
APPLY TO FIXING FOR CEILING.
:NO.410 CEILING DRIVE ANCHOR
:NO.410 CEILING DRIVE ANCHOR
:NO.410 CEILING DRIVE ANCHOR
Material: zinc alloy plug + steel nail.
Size: OD.: 5mm, 6mm, 3/16”, 1/4”
Stainless steel nail also available.
:NO.503 ZINC HAMMER DRIVE ANCHOR
:NO.503 ZINC HAMMER DRIVE ANCHOR
:NO.503 ZINC HAMMER DRIVE ANCHOR
Material: hardened steel.
Plating: zinc plated, yellow zinc plated, hot dip galvanized.
Metric size: 6mm & 8mm
Punch at both end, in order to avoid concatenating together.
Installed by hammer.
:NO.511 EXPRESS NAIL
:NO.511 EXPRESS NAIL
:NO.511 EXPRESS NAIL
Material: steel, stainless steel
Plating: zinc plated, yellow zinc plated, hot dip galvanized
Size: m8 x 110, m10 x 130, m12 x 160, m16 x 190, m20 x 260, m24 x 300
More sizes available.
Head type: External hex head, Flat head & Embossed body
Depth marking by depth groove or blue painting.
:NO.703 CHEMICAL ANCHOR THREAD STUD (RESIN STUD)
:NO.703 CHEMICAL ANCHOR THREAD STUD (RESIN STUD)
:NO.703 CHEMICAL ANCHOR THREAD STUD (RESIN STUD)
Material: Steel
Metric size: m3, m4, m5, m6
Unc size: 1/8”, 3/16”, 1/4”
With round head screw also available.
Hook assembly types: c hook, o hook
Body shells can be supplied separately.
:NO.601 SPRING TOGGLE
:NO.601 SPRING TOGGLE
:NO.601 SPRING TOGGLE
** BODY: ALUMIMUN.
**NAIL/PIN MATERIAL: ALUMINUM OR STAINLESS STEEL OR STEEL.
**MADE TO CUSTOMER'S DRAWING.
:NO.508 ALUMINUM DRIVE ANCHOR
:NO.508 ALUMINUM DRIVE ANCHOR
:NO.508 ALUMINUM DRIVE ANCHOR
Material: steel or stainless steel
Size: thread: m8, m10, m12, m16 & m20
Type: Eye type, Tail type, L type.
:NO.713 CAST IN SOCKET
:NO.713 CAST IN SOCKET
:NO.713 CAST IN SOCKET
*Stainless steel body with alloy steel point.
:NO.417 BI-METAL SELF DRILLING SCREW
:NO.417 BI-METAL SELF DRILLING SCREW
:NO.417 BI-METAL SELF DRILLING SCREW
Material: Steel Z/P; HDG; Stainless steel
Size: m10x45, m12x55, m12x75, m12x95, m16x75, m16x95, m16x105.
Pre-intall in wall. Just screw in wall anchor without drilling hole.
:NO.123 ELEPHANT FOOT CAST IN SOCKET
:NO.123 ELEPHANT FOOT CAST IN SOCKET
:NO.123 ELEPHANT FOOT CAST IN SOCKET
Material: zinc alloy
3 points type
Size: 13 x 31mm & 13 x 42mm
Screw use of m4.0 to m4.2
Self drilling into plasterboard by electric screwdriver or normal screwdriver.
:NO.916 ZINC ALLOY SPEED DRIVE PLUG (SPP)
:NO.916 ZINC ALLOY SPEED DRIVE PLUG (SPP)
:NO.916 ZINC ALLOY SPEED DRIVE PLUG (SPP)
NO.906HT FRAME SCREW SETTING TOOL
:NO.906HT FRAME SCREW SETTING TOOL
:NO.906HT FRAME SCREW SETTING TOOL
:NO.906HT FRAME SCREW SETTING TOOL
NO.607 STEEL / NYLON TOGGLE
:NO.607 STEEL / NYLON TOGGLE
:NO.607 STEEL / NYLON TOGGLE
:NO.607 STEEL / NYLON TOGGLE
Material: steel or stainless steel
Size: thread: m5, m6, m8, m10, m12
Apply to coupling threaded rod.
:NO.122 ROUND COUPLING NUT
:NO.122 ROUND COUPLING NUT
:NO.122 ROUND COUPLING NUT
NO.SC HOLLOW WALL ANCHOR SUITCASE
:NO.SC HOLLOW WALL ANCHOR SUITCASE
:NO.SC HOLLOW WALL ANCHOR SUITCASE
:NO.SC HOLLOW WALL ANCHOR SUITCASE
Material: plastic
Size: o.d.: 5x20mm; 6x25mm; 8x30mm; 10x40mm
Color can be changed as request.
Use with wood screw.
:NO.807 PLASTIC RIB PLUG
:plastic
:5x20mm; 6x25mm; 8x30mm; 10x40mm
Material: steel & stainless steel.
Size: M6, M8, M10, M12
With hex head bolt: 4.6 grade, 5.8 grade, 8.8 grade
Hook assembly types: c hook, o hook
Body shells can be supplied separately.
:NO.502 ONE SEGMENT EXPAND SHIELD (TAM SHIELD)
:steel & stainless steel.
:M6, M8, M10, M12
*Side mount & Vertical mount.
*Wood screw & Tek screw
:NO.415 ROD HANGER
:NO.415 ROD HANGER
:NO.415 ROD HANGER
MATERIAL: STEEL
SIZE: M6
FLAT HEAD TORX RECESS
APPLY TO TIMBER, WOOD.
DEPTH CAN BE ADJUSTED, DUE TO 2 PARTS OF THREAD.
:NO.408 ADJUSTING SCREW
:STEEL
:M6
NO.302-7 TIE WIRE WEDGE ANCHOR
:NO.302-7 TIE WIRE WEDGE ANCHOR
:NO.302-7 TIE WIRE WEDGE ANCHOR
:NO.302-7 TIE WIRE WEDGE ANCHOR
Material: plastic
Size: o.d.: 6x38mm; 8x51mm; 10x61mm
With rim or without rim.
Apply to solid wall and hollow wall.
:NO.809 UNIVERSAL PLASTIC PLUG
:plastic
:6x38mm; 8x51mm; 10x61mm
MATERIAL: STEEL or STAINLESS STEEL
ALL SIZES AVAILABLE.
APPLY TO INSTALLATION OF CEILING.
BAND CAN BE CUTTED AT ANY LENGTH FOR INSTALLATION REQUIREMENT.
:NO.412 PERFORATED BANDING STRAP
:STEEL or STAINLESS STEEL
:ALL SIZES AVAILABLE.
Material: nylon or pp.
size: 14 x 33mm
Electric drill is not necessary. Install only by screwdriver.
Self drilling into plasterboard.
Fixture of lighter load.
Use with chipboard screw.
:NO.909 PLASTIC SPEED DRIVE PLUG
:nylon or pp.
:14 x 33mm
Material: Steel
Metric size: m5, m6, m8
One-forming. Strength is better than spring toggle wing.
:NO.604 GRAVITY TOGGLE: HD
:Steel
:m5, m6, m8
Material: steel, yellow z/p.
With blue ring and undercap.
Size: m6x8x48; m8x12x80; m10x14x80; m12x16x80mm.
Embossed (knurled) on surface.
Use chemical resin to fix sleeve in wall.
:NO.710 INNER THREAD STEEL SLEEVE (PIPE ANCHOR)
:steel, yellow z/p.
:m6x8x48; m8x12x80; m10x14x80; m12x16x80mm.
Material: Steel
Metric size: 405D, 409D, 422D, 423D
Unc size: 1/8XSD, 1/8SD, 1/8SLD, 1/8LD
:NO.102D DRIVE ANCHORS
:Steel
:405D, 409D, 422D, 423D
PROFESSIONAL USE
PORTABLE; EASY TO USE.
LONG-DURABLE
:NO.HT-01 HOLLOW WALL ANCHOR SETTING TOOL
:NO.HT-01 HOLLOW WALL ANCHOR SETTING TOOL
:NO.HT-01 HOLLOW WALL ANCHOR SETTING TOOL
MATERIAL: STEEL, STAINLESS STEEL
METRIC SIZE: M6, M8, M10, M12, M16, M20
UNC SIZE: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”
PLAIN BODY & EMBOSSED BODY ARE AVAILABLE.
:NO.403 DROP IN ANCHOR
:STEEL, STAINLESS STEEL
:M6, M8, M10, M12, M16, M20
Material: steel
Size: thread from 2.5mmo 6.0mm; length from 12mm to 200mm.
Head type: csk head, pan head.
Recess: pozi, torx.
Full thread or half thread.
Apply to timber, wood.
Various surface treatment.
:NO.131 CHIPBOARD SCREW
:steel
:thread from 2.5mmo 6.0mm; length from 12mm to 200mm.
Material: nylon plug + steel nail.
Size: OD: 3/16” (5mm) & 1/4” (6.5mm); length from 1” to 6”.
With steel nail slotted head.
Head type: flat head, round head, mushroom head.
:NO.801 NYLON NAIL PLUG
:nylon plug + steel nail.
:3/16” (5mm) & 1/4” (6.5mm); length from 1” to 6”.
NO.917 SEVEN HOOK S/S A2
:NO.917 SEVEN HOOK S/S A2
:NO.917 SEVEN HOOK S/S A2
:NO.917 SEVEN HOOK S/S A2
NO.308 IR SLEEVE ANCHOR
:NO.308 IR SLEEVE ANCHOR
:NO.308 IR SLEEVE ANCHOR
:NO.308 IR SLEEVE ANCHOR
Material: steel
Size: m8, m12
Wood thread to suit wall plug.
O-ring head by spot welding
:NO.701 EYE BOLT WELDED
:steel
:m8, m12
MATERIAL: STEEL
SIZE: 6 X 60, 8 X 95, 8 X 115
APPLY TO LIGHT-DUTY CONCRETE WALL.
:NO.411 HEMA NAILS (PIPE TYPE)
:STEEL
:6 X 60, 8 X 95, 8 X 115
NO.819 3 IN ONE PLASTIC PLUG
:NO.819 3 IN ONE PLASTIC PLUG
:NO.819 3 IN ONE PLASTIC PLUG
:NO.819 3 IN ONE PLASTIC PLUG
Material: nylon plug + steel wood screw
Size: o.d.: 8mm, 10mm
With pozi head screw
Two wing or four wing is available.
:NO.704 NYLON FRAME FIXING (SCREW IN)
:nylon plug + steel wood screw
:8mm, 10mm
*Just hand press to clamp 45 degree guider tool into decking wood.
*Wood board wide range from 95-140mm.
*Decking screw material: S/S #316 & Steel ruspert
:NO.919 HIDDEN GUIDER TOOL (FOR DECKING SCREW)
:NO.919 HIDDEN GUIDER TOOL (FOR DECKING SCREW)
:NO.919 HIDDEN GUIDER TOOL (FOR DECKING SCREW)
Material: Steel
Metric size: m4, m5
One-forming. Strength is better than spring toggle wing.
:NO.603 GRAVITY TOGGLE TYPE: LD
:Steel
:m4, m5
*FOR FRAME SCREW
:NO.9064 WOOD STEP DRILL
:NO.9064 WOOD STEP DRILL
:NO.9064 WOOD STEP DRILL
Anchor bolts
:Anchor bolts
:Anchor bolts
:Anchor bolts
Material: nylon plug + plastic nail
Plug size: 10x60mm; 10x80mm; 10x100mm; 10x120mm; 10x135mm.
Big disc od: 60mm
Big disc can fix bigger surface-area of object.
:NO.816 NYLON NAIL PLUG WITH SEPARATE BIG DISC
:nylon plug + plastic nail
:10x60mm; 10x80mm; 10x100mm; 10x120mm; 10x135mm.
Material: zinc plug + steel screw
Cone nut type
Size: o.d.: 8mm, 10mm
Csk head or pan head screw is available.
Plastic cap also supplying
:NO.706 METAL FRAME ANCHOR
:zinc plug + steel screw
:8mm, 10mm
Material: pvc.
Flute type & Taper type
Size: OD: 4mm (yellow), 5mm (white), 6mm (red), 7mm (green), 8mm (blue), 10mm (orange)
Length: from 25mm to 60mm.
Packing: in bulk or cardboard box or frame pack 25pcs.
:NO.802 PVC WALL PLUG
:pvc.
:4mm (yellow), 5mm (white), 6mm (red), 7mm (green), 8mm (blue), 10mm (orange) Length: from 25mm to 60mm.
Material: steel, zinc plated or black.
Size: 10x30mm & 10x40mm
Use hammer to hit into plasterboard, then fix by screw.
:NO.815 PLASTER BOARD HAMMER STEEL ANCHOR
:steel, zinc plated or black.
:10x30mm & 10x40mm
**TYPE 17 CUTTING
:NO.132 WOOD SCREW, U THREAD
:NO.132 WOOD SCREW, U THREAD
:NO.132 WOOD SCREW, U THREAD
Material: steel, zinc plated.
Metric size: M5X30, M6X32, M8X38, M8X60, M10X60
Expansion by using wood screw.
:NO.509 SLEEVE SPREADING ANCHOR
:steel, zinc plated.
:M5X30, M6X32, M8X38, M8X60, M10X60
NO.723 PLASTIC PACKER (U TYPE)
:NO.723 PLASTIC PACKER (U TYPE)
:NO.723 PLASTIC PACKER (U TYPE)
:NO.723 PLASTIC PACKER (U TYPE)
Material: steel & stainless steel
Metric size: m6, m8, m10, m12, m16
Unc size: 1/4”, 5/6”, 3/8”, 5/8”, 3/4”, 7/8”
Without spring available
With short spring available.
With long spring available.
:NO.606 SPRING NUT (STRUT NUT)
:steel & stainless steel
:Metric size: m6, m8, m10, m12, m16 Unc size: 1/4”, 5/6”, 3/8”, 5/8”, 3/4”, 7/8”
Material: steel
Size: M6, M8, M10, M12
With plastic ring & undercap
With hex head bolt 8.8 grade
Hook assembly types: c hook, o hook – bending hook or forged hook.
Body shells can be supplied separately.
:NO.409 EXPAND SHIELD WITH TWO RING (TWO SEGMENT)
:steel
:M6, M8, M10, M12
Material: zinc alloy
Size: 15 x 29mm.
Screw use of m4.0 to m4.2
Self drilling into plasterboard by electric screwdriver or normal screwdriver.
:NO.908 ZICN ALLOY SPEED DRIVE PLUG (SPA)
:zinc alloy
:15 x 29mm.
Material: zinc alloy nut + steel screw
Size: m7x50, m7x70, m7x90, m7x120
Various color of plastic cap also available.
:NO.906 FRAME SCREW
:zinc alloy nut + steel screw
:m7x50, m7x70, m7x90, m7x120
*MATERIAL: STEEL OR STAINLESS STEEL
*ROUND THREAD TYPE
:NO.127 LIFTING SOCKET ROUND THREAD, WITH PLASTIC CAP
:STEEL OR STAINLESS STEEL
:NO.127 LIFTING SOCKET ROUND THREAD, WITH PLASTIC CAP
Material: PP
Size (grip range): PE (4-12mm); PF (15-19mm); PG (24-28mm)
Apply to hollow wall.
Install with wood screw.
:NO.811 SAFE PLASTIC TOGGLE
:PP
:PE (4-12mm); PF (15-19mm); PG (24-28mm)
MATERIAL: ALUMINUM
SIZE: M4 X 39
APPLY TO ELECTRICAL APPLIANCE.
:NO.101A ALUMINUM HOLLOW WALL ANCHOR
:ALUMINUM
:M4 X 39
Material: steel
Plating: zinc plated, black phosphate, gray phosphate.
Size: thread: 3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
Head type: bugle head.
Recess: Phillips #2
Self drilling tip into steel sheet.
Apply to plasterboard.
:NO.15-61 BUGLE HEAD SELF DRILLING SCREW
:steel
:3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
*FOR NYLON WALL PLUG
:NO.1525 SAFETY SCREW
:NO.1525 SAFETY SCREW
:NO.1525 SAFETY SCREW
Material: nylon or plastic
Size: m4x20; m5x25; m6x30; m7x37; m8x40; m10x50; m12x60; m14x75
Color can be changed as request.
Lower prices.
Use with wood screw.
:NO.804 F TYPE WALL PLUG
:nylon or plastic
:m4x20; m5x25; m6x30; m7x37; m8x40; m10x50; m12x60; m14x75
Material: head: pp. nail: s/s A2, A4, steel NANO.
Size: 2.13x30mm; 2.13 x 40mm, 3.35x40mm, 3.35 x 50mm, 3.35 x 65mm.
Various head color: white, brown, black, oak.
Matches with most products
Fix uPVC profiles in combination with the annular ring shank nails.
Apply to secure claddings, fascias and soffits.
:NO.1508 PLASTIC HEADED NAIL (POLYTOP PIN)
:pp. nail: s/s A2, A4, steel NANO.
:2.13x30mm; 2.13 x 40mm, 3.35x40mm, 3.35 x 50mm, 3.35 x 65mm.
NO.820 STRIP PLASTIC PLUG
:NO.820 STRIP PLASTIC PLUG
:NO.820 STRIP PLASTIC PLUG
:NO.820 STRIP PLASTIC PLUG
Material: nylon plug + steel wood screw
Cone nut type
Size: o.d.: 8mm, 10mm
With pozi head screw
Plastic cap also supplying
:NO.705 NYLON FRAME ANCHOR
:nylon plug + steel wood screw
:8mm, 10mm
With styrene or without styrene is available.
Size: 235ml, 345ml & 380ml
Guarantee for 1 year.
:NO.708 EASY-MIXING MORTAR (RESIN)
:NO.708 EASY-MIXING MORTAR (RESIN)
:235ml, 345ml & 380ml
*SIZE: M8X125, M8X155, M10X125, M10X155
:NO.705 MARBLE FIXING SET
:NO.705 MARBLE FIXING SET
:M8X125, M8X155, M10X125, M10X155
MATERIAL: STEEL
METRIC SIZE OR INCH SIZE IS AVAILABLE.
SIZE: M4, M5, M6, 1/8”, 3/16”, 1/4”.
INSTALL: APPLY TO THIN METAL SHEETS FORMING A NUT SHAPE IN METAL SHEET IN ORDER TO SCREW IN
INSTALLS EASILY AND QUICKLY BY SETTING TOOL
:NO.103 JACK NUT
:STEEL
:M4, M5, M6, 1/8”, 3/16”, 1/4”.
**MATERIAL: STEEL
**SIZE: M6
**APPLY TO TIMBER, WOOD.
**DEPTH OF SCREW CAN BE ADJUSTED.
:NO.413 SPACING SCREW
:STEEL
:M6
MATERIAL: STEEL
METRIC SIZE: M10, M12, M16, M20
ASSEMBLED WITH HEX BOLT & WASHER.
PLASTIC RING IN MIDDLE.
APPLY TO HEAVY DUTY
:NO.306 SAFETY ANCHOR, HEAVY DUTY
:STEEL
:M10, M12, M16, M20
Material: steel
size: 8 x 32mm
Hit in concrete ceiling wall with hammer.
Use with steel strap band for hanging water pipe, air-conditioning pipe..etc.
:NO.911 KEY CEILING ANCHOR
:steel
:8 x 32mm
Content: 20pcs 25mm bits + 1pc 50mm bit + 1pc magnetic big holder
All of normal common bits can be easy to find and store.
Convenient to bring for work.
:NO.15-36 HANGER BIT PACKAGE--22PCS
:NO.15-36 HANGER BIT PACKAGE--22PCS
:NO.15-36 HANGER BIT PACKAGE--22PCS
Material: steel
** HEAD TYPE: EYE TYPE OR MUSHROOM HEAD
Size: o.d. 5mm, 6.5mm
Installed by hammer
:NO.512 BENDING SPIKE
:steel
:5mm, 6.5mm
Material: pp
Size (grip range): PA (3-5mm); PB (9-13mm); PC (16-18mm); PD (26-28mm)
Push pin also available.
Apply to hollow wall.
Load light duty objects.
:NO.803 PLASTIC TOGGLE
:pp
:PA (3-5mm); PB (9-13mm); PC (16-18mm); PD (26-28mm)
*TOP SPRING STRUT NUT (S/S SPRING / STEEL NUT)
:NO.606-1 STEEL STRUT NUT
:NO.606-1 STEEL STRUT NUT
:NO.606-1 STEEL STRUT NUT
NO.510 EXPAND ANCHOR ITALY TYPE LIGHT DUTY
:NO.510 EXPAND ANCHOR ITALY TYPE LIGHT DUTY
:NO.510 EXPAND ANCHOR ITALY TYPE LIGHT DUTY
:NO.510 EXPAND ANCHOR ITALY TYPE LIGHT DUTY
Material: steel, stainless steel.
Size: M6, M8, M10, M12, M16
With hex head bolt
Hook assembly types: c hook, o hook – bending hook or forged hook.
Body shells can be supplied separately.
:NO.501 EXPANSION ANCHOR P TYPE 4 SEGMENT (FIX BOLT)
:steel, stainless steel.
:M6, M8, M10, M12, M16
Material: plastic
With 3 points on top
size: 15x28mm; 10x33.5mm; 15x43.5mm
Electric drill is not necessary. Install only by screwdriver.
:NO.813 AUGER PLASTIC ANCHOR
:plastic
:NO.813 AUGER PLASTIC ANCHOR
*MATERIAL: ZINC ALLOY
**WOOD SCREW & CONCRETE SCREW TO SUIT THE SLEEVE ALSO AVAILABLE.
:NO.906S WINDOW FRAME SLEEVE, ZINC ALLOY
:ZINC ALLOY
:NO.906S WINDOW FRAME SLEEVE, ZINC ALLOY
*MATERIAL: Steel or Stainless Steel
*Metric size and Inch size.
*Length: 1meter, 2meters, 3meters
:NO.915 THREAD ROD
:Steel or Stainless Steel
:Length: 1meter, 2meters, 3meters
Material: plastic
Size: o.d.: 5x20mm; 6x25mm; 8x30mm; 10x40mm
Color can be changed as request.
Use with wood screw.
:NO.807 PLASTIC RIB PLUG
:plastic
:5x20mm; 6x25mm; 8x30mm; 10x40mm
Material: steel
size: 8x20x42mm
Hit in concrete ceiling wall with hammer.
:NO.911S TUBE EYE CEILING ANCHOR
:steel
:8x20x42mm
MATERIAL: SOLID BRASS
METRIC SIZE: M4, M5, M6, M8, M10, M12, M14
:NO.402 BRASS ANCHOR
:SOLID BRASS
:M4, M5, M6, M8, M10, M12, M14
Material: steel, zinc plated or yellow z/p.
Size: o.d.: m6, m8, m10, m12, m16 & m20.
Installed by hammer; easy install.
:NO.712 HIT ANCHOR
:steel, zinc plated or yellow z/p.
:m6, m8, m10, m12, m16 & m20.
Material: steel, yellow z/p or white z/p.
Head type: flat head.
Size: thread: 3.5mm, 4mm, 5mm, 7mm.
Suit with nylon plug.
:NO.1504 NAIL SCREW
:steel, yellow z/p or white z/p.
:3.5mm, 4mm, 5mm, 7mm.
Material: steel, blue ruspert (Teflon).
Size: o.d.: 3/16” & 1/4”.
Head type: CSK head phillips or hex washer head slotted.
:NO.711 BLUE CONCRETE SCREW
:steel, blue ruspert (Teflon).
:3/16” & 1/4”
MATERIAL: STEEL
METRIC SIZE: M4, M5, M6
INCH SIZE: 1/8”, 3/16”, 1/4”
WITH TRUSS HEAD SCREW
:NO.102 HOLLOW WALL ANCHOR (M TYPE SYSTEM)
:STEEL
:M4, M5, M6 INCH SIZE: 1/8”, 3/16”, 1/4”
NO.724 RUBBER NUT
:NO.724 RUBBER NUT
:NO.724 RUBBER NUT
:NO.724 RUBBER NUT
NO.302-8 SELF DRILL CEILING ANCHOR
:NO.302-8 SELF DRILL CEILING ANCHOR
:NO.302-8 SELF DRILL CEILING ANCHOR
:NO.302-8 SELF DRILL CEILING ANCHOR
NO.821 TEN PLASTIC PLUG
:NO.821 TEN PLASTIC PLUG
:NO.821 TEN PLASTIC PLUG
:NO.821 TEN PLASTIC PLUG
Injection gun for all kind of size.
Pushing is smooth, not get jam.
Durable, not easy to damage.
:NO.708 CAULKING GUN
:NO.708 CAULKING GUN
:NO.708 CAULKING GUN
Material: Steel
Round nut type, strength is the best.
With hex head bolt available.
With thread bar available.
With closed eye available.
With open eye available.
:NO.605 GRAVITY TOGGLE BOLT
:Steel
:NO.605 GRAVITY TOGGLE BOLT
Material: zinc alloy
Size: 13 x 33mm
Screw use of m4.0 to m4.2
Self drilling into plasterboard by electric screwdriver or normal screwdriver.
:NO.910 ZINC ALLOY SPEED DRIVE PLUG (SPC)
:zinc alloy
:13 x 33mm
NO.514 METAL INSULATION PLUG
:NO.514 METAL INSULATION PLUG
:NO.514 METAL INSULATION PLUG
:NO.514 METAL INSULATION PLUG
Material: steel or stainless steel
Metric thread: m5, m6, m8, m10, m12, m16 & m20
Unc thread: 1/4”, 5/16”, 3/8”, 1/2”, 5/8” & 3/4”
Apply to coupling threaded rod.
:NO.121 HEX COUPLING NUT
:steel or stainless steel
:m5, m6, m8, m10, m12, m16 & m20 Unc thread: 1/4”, 5/16”, 3/8”, 1/2”, 5/8” & 3/4”
NO.126 SOLID BAR SOCKET
:NO.126 SOLID BAR SOCKET
:NO.126 SOLID BAR SOCKET
:NO.126 SOLID BAR SOCKET
Material: Steel, stainless steel
Size: M6, M8, M10, M12
With hex head bolt
Hook assembly types: c hook, o hook – bending hook or forged hook
Body shells can be supplied separately.
:NO.506 EXPANSION ANCHOR R TYPE 3 SEGMENT
:Steel, stainless steel
:M6, M8, M10, M12
Material: steel
Plating: zinc plated, black phosphate, gray phosphate.
Size: thread: 3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
Head type: bugle head.
Recess: Phillips #2
Self drilling tip into steel sheet.
Apply to plasterboard.
:NO.1561 SELF DRILLING SCREW, BUGLE HEAD
:steel
:3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
NO.104HT HOLLOW WALL ANCHOR HAND TOOL
:NO.104HT HOLLOW WALL ANCHOR HAND TOOL
:NO.104HT HOLLOW WALL ANCHOR HAND TOOL
:NO.104HT HOLLOW WALL ANCHOR HAND TOOL
Material: nylon plug + steel nail screw
Size: o.d.: 5mm, 6mm, 8mm
With pozi head nail screw
Head type: CSK head, Round head, Mushroom head, Flush head.
:NO.806 NYLON NAIL IN ANCHOR
:nylon plug + steel nail screw
:5mm, 6mm, 8mm
Material: plastic
Size: 3/16 x 3/4”; 3/16 x 7/8”; 1/4 x 1”; 5/16 x 1-1/2”
Color can be changed as request.
Use with wood screw.
:NO.808 CONICAL PLUG
:plastic
:3/16 x 3/4”; 3/16 x 7/8”; 1/4 x 1”; 5/16 x 1-1/2”
Material: steel
Plating: zinc plated, black phosphate, gray phosphate.
Size: thread: 3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
Head type: bugle head.
Recess: Phillips #2
Screw tip
Apply to plasterboard.
Screw strip: install more quickly by electric power tool.
:NO.15-47PS COLLATED PLASTIC STRIP DRYWALL SCREW
:steel
: 3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
NO.414 HEX SHOULDER WOOD SCREW
:NO.414 HEX SHOULDER WOOD SCREW
:NO.414 HEX SHOULDER WOOD SCREW
:NO.414 HEX SHOULDER WOOD SCREW
Material: steel
Head type: flat head & eye type.
O.d.: 3/16” & 1/4”; length: 1” to 4”.
:NO.504 STEEL SPLIT DRIVE ANCHOR
:steel
:NO.504 STEEL SPLIT DRIVE ANCHOR
