Quality and Service in Priority
Guider tool - for decking screw
MATERIAL: STEEL
SIZE OF SCREW: M4, M5, M6, M8
WITH PAN HEAD SCREW.
WITH C HOOK, O HOOK, L HOOK ALSO AVAILABLE.
BODY SHELLS CAN BE SUPPLIED SEPARATELY.
-- ONE-PIECE TYPE, STAMPING HEAD & NUT AUTOMATICALLY.
-- FAST DELIVERY TIME.
MATERIAL: STEEL AND STAINLESS STEEL
METRIC SIZE: M6, M8, M10, M12, M14, M16, M20
UNC SIZE: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”
ASSEMBLED WITH HEX NUT & WASHER
ALTERNATIVES: STUD MADE BY TURNING OR COLD FORGED.
Material: steel, zinc plated or yellow z/p or mechanical galvanized.
Size: 10x75, 10x100, 10x130, 10x150, 12x75, 12x100, 12130, 12x150, 16x100, 16x150
Head type: Hex flange head / coupler type (inner thread hole in head)
Installed by electrical power tool, don’t need to use hammer or spanner, in order to save time.
Replace the traditional steel wall anchor.
Material: Stainless steel or steel (zinc plated or yellow z/p)
Size: Diameter 7.5mm / Length: from 42mm to 300mm
Head type: Flat head or Round head
The Countersunk Concrete Masonry Screw is suitable for fixing into concrete, stone, lightweight concrete and sandstone.
MATERIAL: STEEL
SIZE OF SCREW: M4, M5, M6, M8
WITH PAN HEAD SCREW.
WITH C HOOK, O HOOK, L HOOK ALSO AVAILABLE.
BODY SHELLS CAN BE SUPPLIED SEPARATELY.
*EASY TO USE. ONLY USE ELECTRICAL TOOL TO INSTALL.
MATERIAL: STEEL AND STAINLESS STEEL
METRIC SIZE: O.D. 8mm, 10mm, 12mm, 16mm, 20mm
UNC SIZE: O.D.1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”
MATERIAL: STEEL AND STAINLESS STEEL
SIZES: O.D. 8mm, 10mm, 12mm, 16mm, 20mm
UNC SIZE ANCHOR BOLTS ARE AVAILABLE.
HEX BOLT: 4.6 GRADE, 5.8 GRADE OR 8.8 GRADE
MATERIAL: STEEL
SIZE: 6 X 35mm, 6 X 65mm
APPLIED TO CONCRETE ROOF FOR FIXING OBJECTS QUICKLY.
EASY TO USE BY HAMMER – NO MISS AND FAILURE BY FIXING OBJECTS
GOOD PULL-OUT VALUE AFTER FIXING.
HIT BY HAMMER; EASY TO INSTALL.
APPLY TO FIXING FOR CEILING.
Material: zinc alloy plug + steel nail.
Size: OD.: 5mm, 6mm, 3/16”, 1/4”
Stainless steel nail also available.
Material: hardened steel.
Plating: zinc plated, yellow zinc plated, hot dip galvanized.
Metric size: 6mm & 8mm
Punch at both end, in order to avoid concatenating together.
Installed by hammer.
Material: steel, stainless steel
Plating: zinc plated, yellow zinc plated, hot dip galvanized
Size: m8 x 110, m10 x 130, m12 x 160, m16 x 190, m20 x 260, m24 x 300
More sizes available.
Head type: External hex head, Flat head & Embossed body
Depth marking by depth groove or blue painting.
PROFESSIONAL USE
PORTABLE; EASY TO USE.
LONG-DURABLE
Injection gun for all kind of size.
Pushing is smooth, not get jam.
Durable, not easy to damage.
Material: plastic
Size: o.d.: 6x38mm; 8x51mm; 10x61mm
With rim or without rim.
Apply to solid wall and hollow wall.
MATERIAL: STEEL
METRIC SIZE OR INCH SIZE IS AVAILABLE.
SIZE: M4, M5, M6, 1/8”, 3/16”, 1/4”.
INSTALL: APPLY TO THIN METAL SHEETS FORMING A NUT SHAPE IN METAL SHEET IN ORDER TO SCREW IN
INSTALLS EASILY AND QUICKLY BY SETTING TOOL
Material: steel
Plating: zinc plated, black phosphate, gray phosphate.
Size: thread: 3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
Head type: bugle head.
Recess: Phillips #2
Self drilling tip into steel sheet.
Apply to plasterboard.
Content: 20pcs 25mm bits + 1pc 50mm bit + 1pc magnetic big holder
All of normal common bits can be easy to find and store.
Convenient to bring for work.
Material: steel
Plating: zinc plated, black phosphate, gray phosphate.
Size: thread: 3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
Head type: bugle head.
Recess: Phillips #2
Screw tip
Apply to plasterboard.
Screw strip: install more quickly by electric power tool.
Material: plastic
Size: o.d.: 5x20mm; 6x25mm; 8x30mm; 10x40mm
Color can be changed as request.
Use with wood screw.
MATERIAL: STEEL
METRIC SIZE: M4, M5, M6
INCH SIZE: 1/8”, 3/16”, 1/4”
WITH TRUSS HEAD SCREW
Material: Steel
Metric size: 405D, 409D, 422D, 423D
Unc size: 1/8XSD, 1/8SD, 1/8SLD, 1/8LD
MATERIAL: ALUMINUM
SIZE: M4 X 39
APPLY TO ELECTRICAL APPLIANCE.
Material: steel, zinc plated or yellow z/p.
Size: o.d.: m6, m8, m10, m12, m16 & m20.
Installed by hammer; easy install.
Material: steel
Head type: flat head & eye type.
O.d.: 3/16” & 1/4”; length: 1” to 4”.
** BODY: ALUMIMUN.
**NAIL/PIN MATERIAL: ALUMINUM OR STAINLESS STEEL OR STEEL.
**MADE TO CUSTOMER'S DRAWING.
Material: Steel
Metric size: m3, m4, m5, m6
Unc size: 1/8”, 3/16”, 1/4”
With round head screw also available.
Hook assembly types: c hook, o hook
Body shells can be supplied separately.
Material: Steel
Metric size: m4, m5
One-forming. Strength is better than spring toggle wing.
With styrene or without styrene is available.
Size: 235ml, 345ml & 380ml
Guarantee for 1 year.
Material: steel, yellow z/p.
With blue ring and undercap.
Size: m6x8x48; m8x12x80; m10x14x80; m12x16x80mm.
Embossed (knurled) on surface.
Use chemical resin to fix sleeve in wall.
*MATERIAL: STEEL OR STAINLESS STEEL
*ROUND THREAD TYPE
*MATERIAL: Steel or Stainless Steel
*Metric size and Inch size.
*Length: 1meter, 2meters, 3meters
Material: steel or stainless steel
Metric thread: m5, m6, m8, m10, m12, m16 & m20
Unc thread: 1/4”, 5/16”, 3/8”, 1/2”, 5/8” & 3/4”
Apply to coupling threaded rod.
Material: steel or stainless steel
Size: thread: m5, m6, m8, m10, m12
Apply to coupling threaded rod.
Material: steel, zinc plated or black.
Size: 10x30mm & 10x40mm
Use hammer to hit into plasterboard, then fix by screw.
Material: steel
size: 8 x 32mm
Hit in concrete ceiling wall with hammer.
Use with steel strap band for hanging water pipe, air-conditioning pipe..etc.
Material: steel
size: 8x20x42mm
Hit in concrete ceiling wall with hammer.
Material: pp
Size (grip range): PA (3-5mm); PB (9-13mm); PC (16-18mm); PD (26-28mm)
Push pin also available.
Apply to hollow wall.
Load light duty objects.
Material: plastic
Size: 3/16 x 3/4”; 3/16 x 7/8”; 1/4 x 1”; 5/16 x 1-1/2”
Color can be changed as request.
Use with wood screw.
Material: nylon or pp.
size: 14 x 33mm
Electric drill is not necessary. Install only by screwdriver.
Self drilling into plasterboard.
Fixture of lighter load.
Use with chipboard screw.
Material: zinc alloy
Size: 15 x 29mm.
Screw use of m4.0 to m4.2
Self drilling into plasterboard by electric screwdriver or normal screwdriver.
Material: plastic
With 3 points on top
size: 15x28mm; 10x33.5mm; 15x43.5mm
Electric drill is not necessary. Install only by screwdriver.
Material: zinc alloy
Size: 13 x 33mm
Screw use of m4.0 to m4.2
Self drilling into plasterboard by electric screwdriver or normal screwdriver.
Material: zinc alloy
3 points type
Size: 13 x 31mm & 13 x 42mm
Screw use of m4.0 to m4.2
Self drilling into plasterboard by electric screwdriver or normal screwdriver.
Material: pvc.
Flute type & Taper type
Size: OD: 4mm (yellow), 5mm (white), 6mm (red), 7mm (green), 8mm (blue), 10mm (orange)
Length: from 25mm to 60mm.
Packing: in bulk or cardboard box or frame pack 25pcs.
**MATERIAL: STEEL
**SIZE: M6
**APPLY TO TIMBER, WOOD.
**DEPTH OF SCREW CAN BE ADJUSTED.
Material: steel, blue ruspert (Teflon).
Size: o.d.: 3/16” & 1/4”.
Head type: CSK head phillips or hex washer head slotted.
Material: steel
Size: thread from 2.5mmo 6.0mm; length from 12mm to 200mm.
Head type: csk head, pan head.
Recess: pozi, torx.
Full thread or half thread.
Apply to timber, wood.
Various surface treatment.
**TYPE 17 CUTTING
Material: steel
Plating: zinc plated, black phosphate, gray phosphate.
Size: thread: 3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
Head type: bugle head.
Recess: Phillips #2
Screw tip
Apply to plasterboard.
Material: steel
Plating: zinc plated, black phosphate, gray phosphate.
Size: thread: 3.5mm, 3.9mm, 4.2mm. length: from 25mm to 75mm.
Head type: bugle head.
Recess: Phillips #2
Self drilling tip into steel sheet.
Apply to plasterboard.
*Stainless steel body with alloy steel point.
*Side mount & Vertical mount.
*Wood screw & Tek screw
*Just hand press to clamp 45 degree guider tool into decking wood.
*Wood board wide range from 95-140mm.
*Decking screw material: S/S #316 & Steel ruspert
Material: zinc plug + steel screw
Cone nut type
Size: o.d.: 8mm, 10mm
Csk head or pan head screw is available.
Plastic cap also supplying
Material: nylon plug + steel wood screw
Cone nut type
Size: o.d.: 8mm, 10mm
With pozi head screw
Plastic cap also supplying
Material: zinc alloy nut + steel screw
Size: m7x50, m7x70, m7x90, m7x120
Various color of plastic cap also available.
*MATERIAL: ZINC ALLOY
**WOOD SCREW & CONCRETE SCREW TO SUIT THE SLEEVE ALSO AVAILABLE.
Material: nylon plug + steel nail screw
Size: o.d.: 5mm, 6mm, 8mm
With pozi head nail screw
Head type: CSK head, Round head, Mushroom head, Flush head.
MATERIAL: STEEL
SIZE: 6 X 60, 8 X 95, 8 X 115
APPLY TO LIGHT-DUTY CONCRETE WALL.
MATERIAL: STEEL
METRIC SIZE: M10, M12, M16, M20
ASSEMBLED WITH HEX BOLT & WASHER.
PLASTIC RING IN MIDDLE.
APPLY TO HEAVY DUTY
MATERIAL: STEEL or STAINLESS STEEL
ALL SIZES AVAILABLE.
APPLY TO INSTALLATION OF CEILING.
BAND CAN BE CUTTED AT ANY LENGTH FOR INSTALLATION REQUIREMENT.
Material: steel, zinc plated.
Metric size: M5X30, M6X32, M8X38, M8X60, M10X60
Expansion by using wood screw.
Material: steel
** HEAD TYPE: EYE TYPE OR MUSHROOM HEAD
Size: o.d. 5mm, 6.5mm
Installed by hammer
Material: Steel
Round nut type, strength is the best.
With hex head bolt available.
With thread bar available.
With closed eye available.
With open eye available.
Material: Steel Z/P; HDG; Stainless steel
Size: m10x45, m12x55, m12x75, m12x95, m16x75, m16x95, m16x105.
Pre-intall in wall. Just screw in wall anchor without drilling hole.
Material: nylon plug + plastic nail
Plug size: 10x60mm; 10x80mm; 10x100mm; 10x120mm; 10x135mm.
Big disc od: 60mm
Big disc can fix bigger surface-area of object.
Material: head: pp. nail: s/s A2, A4, steel NANO.
Size: 2.13x30mm; 2.13 x 40mm, 3.35x40mm, 3.35 x 50mm, 3.35 x 65mm.
Various head color: white, brown, black, oak.
Matches with most products
Fix uPVC profiles in combination with the annular ring shank nails.
Apply to secure claddings, fascias and soffits.
Material: steel, yellow z/p or white z/p.
Head type: flat head.
Size: thread: 3.5mm, 4mm, 5mm, 7mm.
Suit with nylon plug.
MATERIAL: STEEL, STAINLESS STEEL
METRIC SIZE: M6, M8, M10, M12, M16, M20
UNC SIZE: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”
PLAIN BODY & EMBOSSED BODY ARE AVAILABLE.
Material: steel
Size: M6, M8, M10, M12
With plastic ring & undercap
With hex head bolt 8.8 grade
Hook assembly types: c hook, o hook – bending hook or forged hook.
Body shells can be supplied separately.
Material: steel, stainless steel.
Size: M6, M8, M10, M12, M16
With hex head bolt
Hook assembly types: c hook, o hook – bending hook or forged hook.
Body shells can be supplied separately.
Material: Steel, stainless steel
Size: M6, M8, M10, M12
With hex head bolt
Hook assembly types: c hook, o hook – bending hook or forged hook
Body shells can be supplied separately.
Material: steel & stainless steel.
Size: M6, M8, M10, M12
With hex head bolt: 4.6 grade, 5.8 grade, 8.8 grade
Hook assembly types: c hook, o hook
Body shells can be supplied separately.
Material: steel or stainless steel
Size: thread: m8, m10, m12, m16 & m20
Type: Eye type, Tail type, L type.
Material: nylon plug + steel wood screw
Size: o.d.: 8mm, 10mm
With pozi head screw
Two wing or four wing is available.
Material: nylon or plastic
Size: m4x20; m5x25; m6x30; m7x37; m8x40; m10x50; m12x60; m14x75
Color can be changed as request.
Lower prices.
Use with wood screw.
MATERIAL: SOLID BRASS
METRIC SIZE: M4, M5, M6, M8, M10, M12, M14
Material: Steel
Metric size: m5, m6, m8
One-forming. Strength is better than spring toggle wing.
Material: steel & stainless steel
Metric size: m6, m8, m10, m12, m16
Unc size: 1/4”, 5/6”, 3/8”, 5/8”, 3/4”, 7/8”
Without spring available
With short spring available.
With long spring available.
*TOP SPRING STRUT NUT (S/S SPRING / STEEL NUT)
*FOR FRAME SCREW
*SIZE: M8X125, M8X155, M10X125, M10X155
Material: nylon plug + steel nail.
Size: OD: 3/16” (5mm) & 1/4” (6.5mm); length from 1” to 6”.
With steel nail slotted head.
Head type: flat head, round head, mushroom head.
Material: PP
Size (grip range): PE (4-12mm); PF (15-19mm); PG (24-28mm)
Apply to hollow wall.
Install with wood screw.
Material: plastic
Size: o.d.: 5x20mm; 6x25mm; 8x30mm; 10x40mm
Color can be changed as request.
Use with wood screw.
MATERIAL: STEEL
SIZE: M6
FLAT HEAD TORX RECESS
APPLY TO TIMBER, WOOD.
DEPTH CAN BE ADJUSTED, DUE TO 2 PARTS OF THREAD.
Material: steel
Size: m8, m12
Wood thread to suit wall plug.
O-ring head by spot welding
*FOR NYLON WALL PLUG