SIGN IN
Log In / Register
News
Nitto Seiko Launches New Screw Driving Machine with 2.5 Times More Fastening Locations to Support Various Products
Add to my favorite
2023-10-02
On October 1, Nitto Seiko released the new SR580/RC7000 screw fastening robot that can handle a wide variety of products. The number of screw fastening locations on a workpiece that can be registered per robot has been increased to 100, which is 2.5 times the number of conventional models, and the number of screw fastening conditions has been increased to 20, which is 4 times the number of conventional models. Flexible settings enable the robot to handle a large amount of screws and a wide range of products with different screw fastening conditions.
Two robot models are available: the SR580Yθ with two simultaneous control axles and the SR580Yθ-Z with three simultaneous axles, each of which comes with the RC7000-S controller and a screw supply unit. A two-step motion has been added to the robot, which descends to a position away from the screw fastening position, stops once, and then moves to a position above the screw fastening location. This enables fastening of screws at screw fastening locations that are difficult to approach from directly above, reducing the possibility of workpiece damage.
日東精工
螺絲鎖緊機
擰緊點
SR580
RC7000
工件損壞降低
Nitto Seiko
Driving Machine
fastening locations
reduced workpiece damage possibility
