International Fastener Expo 2026 – Taiwan Exhibitor Directory
🔄Reset
TAIWAN
886-6-2309949 , 886-6-2391211
886-6-2309967 , 886-6-3303415
San Shing Fastech Corp. is one of Taiwan's leading vertically integrated manufacturers, integrating fastener manufacturing, tooling, and machinery production under one plant.
Our Tooling Division operates a dedicated manufacturing facility equipped with more than 360 advanced machining and inspection systems. We specialize in OEM cold and hot forging tooling, carbide dies, punches, pins, complex-profile tooling, and fastener manufacturing machinery.
As a fastener manufacturer ourselves with over 60 years of expertise, we develop tooling and machinery based on real production experience, helping customers improve productivity, extend tool life, reduce production costs, and achieve consistent, high-quality manufacturing performance.
San Shing Fastech Corp. is one of Taiwan's leading vertically integrated manufacturers, integrating fastener manufacturing, tooling, and machinery produ...
TAIWAN
886-7-535 7066
886-7-535 7095
MOLS Group- 35 Years of Experience in Screw Manufacturing
MOLS Group has 35 years of experience in screw manufacturing and operates a supply chain system with screw manufacturing, heat-treating and painting. MOLS group expanded the business scope step by step. The screw manufacturing factory was set up in 1991, heat treat factory in 2004 and painting factory in 2018. With 35 years of experience to focus on the supply in the US market, MOLS is familiar with what customers’ needs. MOLS dedicates to quality improvement and treats customers’ comments as treasure. We listen to customers and respond to their needs at our best.
Introduction of Modern Painting Equipment
MOLS Group has worked out an achievement in the head painted screws in recent years, especially on Roofing Screws and RV Screws, and we also paint any screws that are required to head painting. In order to offer our customers steady lead time and good quality on painted screws, MOLS invested millions of US dollars to establish the painting factory as well as modern painting equipment. The customized modern automatic painting equipment has sufficiently increased the painting capacity and also avoid hand racking screws causing the unstable lead times. To ensure our customers having the good quality products, MOLS made a lot of effort to improve the screw performance in regard to drilling time and paint adhesion. The paint adhesion on screw heads and EPDM bonded washers is critical, so MOLS not only conducts the performance test with the testing machine but also imitates the real-world test that how customers use the screws in their applications.
The painting colors are customized to meet customers’ needs, and we offer more than hundreds of colors to match customers’ applications.
Various Options to Maximize Customers’ Benefits
Like our company name reads, the 4 letters of MOLS stand for More Efficiency, Outstanding Quality, Less Cost and Speedy Service, which are our business philosophy that we want to do for all of our customers. MOLS is specialized in manufacturing various fasteners, such as Roofing Screw, Self-Tapping Screw, RV Screw, Gutter Screw, HAVC Screw, Self-Drilling Screw, Home Appliance Screw and Triangular Thread Screw that are used in various industries and received good feedback from the customers. MOLS is dedicated to providing our best to all of our customers and use our valuable resources to create maximum benefits for our customers.
Contact: Sabrina Dai, Vice President of Marketing
Email: sabrina@molscorp.com.tw
MOLS Group- 35 Years of Experience in Screw Manufacturing
MOLS Group has 35 years of experience in screw manufacturing and operates a supply chain system wi...
TAIWAN
886-6-2954000
886-6-2953939
We are Fastener World Inc. from Taiwan, a professional publisher focusing on the fastener, hardware and building industry. Our publications, Fastener World Magazine, Hardware World magazine, and China Fastener World Magazine, are the leading professional buyer’s guide. The circulation of each magazine is up to 15,000 per issue and sent to more than 200 countries in the world. In addition, we are also the agent of many international industrial exhibitions around the world where we exhibit our magazine and send it out to the key international buyer’s hands.
TAIWAN
886-7-7259858
886-7-7259199
1. Automotive and Appliances Fasteners
2. CNC & Machined Parts
3. Stampings & Castings
4. Custom Components
1. Automotive and Appliances Fasteners
2. CNC & Machined Parts
3. Stampings & Castings
4. Custom Components
TAIWAN
886-7-6241000
886-7-6242000
We are an ISO/TS 146949 2002 quanlity approved supplier since May 20 09. We specialize in providing high quanlity fastener and hardware products. Our extensive products range from regular standard items such as fo llows: 1. Bolts & Screws 2. Welding Nuts & Bushing 3. Turning Parts 4. C lose Dies Parts. We also carter to customers' orders upon request, to accommodate every customer's unique requirement. Should you require an y information or assistance at any time, please contact us.
TAIWAN
886-7-5377111~4
886-7-5376655 , 886-7-5366122
SUPERIOR QUALITY FASTENERS CO., LTD. was established in 1998. We are an ISO 9001 quality approved supplier since June, 2001 & TS16949 on May 2009. We specialize in providing high quality fastener and har dware products. We also cater to customers’ orders upon request, to accommodate eve ry customer's unique requirement. Should you require any information or assistance at any time, please con tact us by email, fax or telephone. Web site: www.sqf.com.tw
TAIWAN
886-2-27313101
886-2-27714019 , 886-2-27411593
Established in 1977, LINKWELL Industry Co., Ltd. celebrates nearly five decades of excellence, having expanded its footprint across Vietnam, Malaysia, Indonesia, Thailand, and China to serve a global clientele. Specializing in the manufacture and trade of a comprehensive assortment of fasteners—including screws, nuts, bolts, and washers—LINKWELL caters to a diverse set of industries with both standard and custom-designed products.
Renowned for its dedication to quality and customer satisfaction, LINKWELL operates under a model that prioritizes the development of durable partnerships with its clients, offering more than just high-caliber fastener solutions. The company maintains a state-of-the-art A2LA-certified laboratory, endowed with advanced inspection tools and manned by a team of seasoned professionals. This robust quality assurance framework ensures that all LINKWELL products meet the most stringent international standards, thereby reinforcing the company’s commitment to excellence.
Established in 1977, LINKWELL Industry Co., Ltd. celebrates nearly five decades of excellence, having expanded its footprint across Vietnam, Malaysia, Indone...
TAIWAN
886-7-3737800
886-7-3737900
JUNEN (JEC) — 39 Years Deeply Rooted in the Metal Mesh Industry
Originating from Taiwan, JUNEN Group (JEC) has been a global leading manufacturer of metal mesh products and machinery since its founding in 1987, with more than 39 years of experience deeply rooted in the industry. For decades, we have served thousands of customers at home and abroad, building stable, long-term partnerships that have earned trust across the industry.
Our business spans the high-tech and heat-treatment industries. Group members include a machinery manufacturing plant and metal conveyor mesh production base in Taiwan, BBI, a specialist in heat-treatment furnace equipment, and KTK, a Taiwan-Japan joint venture specializing in high-quality mesh belt manufacturing. The Group is committed to integrated in-house production and sales, built on technical strength, innovative service, and manufacturing quality, to provide customers with more complete, more professional service.
Our products serve a wide range of processing industries, including high-tech, fasteners, hand tools, solar energy, photovoltaics, electronics, food, and the growing sectors of energy storage and electric vehicles — a reflection of our deep technical versatility and cross-industry adaptability.
JUNEN currently works with more than 500 partner customers and exports its machinery to over 80 countries, including the United States, Japan, Australia, the Middle East, and Southeast Asia, with steady supply to customers across Europe as well. Beyond the high-tech and heat-treatment customers mentioned above, most of our customers also manufacture metal mesh for construction use — including expanded metal and other architectural metal mesh — spanning both manufacturers and contractors, with applications across aerospace, construction, transportation, and public infrastructure.
Over the past three years, JUNEN has achieved strong sales growth in the United States, the Middle East, Japan, Africa, and Central and South America, and continues to expand its global customer base. We also plan to take part in more international exhibitions in 2027, further strengthening our connections with markets around the world.
As a machinery manufacturer, JUNEN not only produces machines but also puts them to work on our own production lines — this dual role as both maker and user is at the very core of our advantage. It allows us to continuously improve machine performance and the user experience, grounded in real production practice. Because every JUNEN machine is custom-built, we encourage our R&D team to see each challenge as an opportunity for breakthrough and refinement, working together to exceed customer expectations and share in every advance we achieve.
Our commitment to quality began with trademark registration and has since been reinforced by ISO 9001:2015 certification, with all products meeting relevant international standards and regulations. We remain dedicated to improving our production efficiency and service quality, striving to deliver the greatest possible satisfaction to every customer.
JUNEN — your trusted long-term partner. We look forward to weaving the next chapter of growth together with you.
JUNEN (JEC) — 39 Years Deeply Rooted in the Metal Mesh Industry
Originating from Taiwan, JUNEN Group (JEC) has been a global leading manufacturer of metal m...
TAIWAN
886-7-951 5858
886-7-951 8866
Founded in 1968, Gwo-Lian Machinery Co., Ltd. originated as CHI SHEN Iron Factory, initially specializing in marine machinery manufacturing and parts processing. In response to growing market demand, Gwo-Lian expanded into the wire machinery industry in 1989, focusing on the design and manufacturing of wire drawing machines, related equipment, and complete production lines. Its solutions serve a wide range of materials and industries, including high-carbon steel, medium- and low-carbon steel, alloy steel, stainless steel, copper, aluminum alloys, titanium alloys, spring steel, bearing steel, aluminum-magnesium alloys, precious metal alloys, welding wire, fasteners, construction, electronics, automotive, machinery, and hardware industries. Since 1993, Gwo-Lian has actively expanded into international markets, with products and services reaching customers across five continents.
In 2003, Gwo-Lian became the first enterprise approved to establish operations in Taiwan's Environmental Science and Technology Park, with its new facility completed in 2005. The company continues to invest in new product development, energy-saving technologies, automation, and intelligent manufacturing, and has obtained multiple international invention patents. Gwo-Lian is committed to its quality philosophy: “Do Not Produce Defects, Do Not Pass Defects Forward, and Exceed Customer Satisfaction.” Through Total Quality Management (TQM), ERP-based management, ISO 9001 certification, and compliance with applicable CE requirements, the company continuously strengthens product quality and operational efficiency.
Gwo-Lian maintains comprehensive in-house precision machining capabilities using Japanese CNC turning and milling equipment designed for continuous, high-precision operation. Machining accuracy can reach 5 μm (0.005 mm), while CNC coordinate measuring equipment provides accuracy of up to 3 μm (0.003 mm). Precision measuring instruments can reach 0.1 μm (0.0001 mm), and roundness measurement accuracy can reach 1 μm (0.001 mm). CNC lathes and turn-mill equipment from established Taiwanese manufacturers are also utilized. Gwo-Lian applies strict quality requirements to its machining partners, whose equipment primarily originates from Germany, Japan, and Switzerland, ensuring consistent and reliable manufacturing quality.
With more than half a century of industry experience, Gwo-Lian has established long-term customer relationships in over 50 countries worldwide. Beyond machinery manufacturing, the company integrates expertise in mechanical engineering, electrical control, software programming, and after-sales service. Its experienced engineering team provides responsive technical support and utilizes remote network connectivity to assist customers with machine diagnostics and troubleshooting.
Gwo-Lian continues to advance smart manufacturing and digital transformation by connecting machinery with cloud-based systems. Production and operating information can be transmitted in real time to computers, smartphones, and other connected devices, enabling customers to monitor machine and production status wherever required. By integrating equipment operating data with information on critical components, the system can further support preventive maintenance and component replacement management, improving equipment utilization and overall production efficiency.
Looking ahead, Gwo-Lian will continue to pursue industry advancement and value-driven innovation, developing low-pollution, energy-efficient, and intelligent manufacturing technologies. Through continuous innovation, the company aims to help the global wire industry reduce environmental impact, improve energy efficiency, and strengthen manufacturing competitiveness while advancing toward Smart Manufacturing and Industry 4.0.
Founded in 1968, Gwo-Lian Machinery Co., Ltd. originated as CHI SHEN Iron Factory, initially specializing in marine machinery manufacturing and parts process...
TAIWAN
+886-7-3723001
+886-7-3721014
Dar Yu is a professional manufacturer of Fasteners, OEM Plastic Boxes and Components and Hand-Tools for over 25 years in TAIWAN. We supply the products to many overseas customers in DIY market and General Industry under customers' brand name.
Dar Yu is a professional manufacturer of Fasteners, OEM Plastic Boxes and Components and Hand-Tools for over 25 years in TAIWAN. We supply the products to ma...
TAIWAN
886-6-3351876
886-6-3351879
For more than 30 years, L&W Fasteners Company has been dedicated to providing high-quality fastening solutions to customers worldwide, with a primary focus on the North American market. Through our commitment to reliability, professionalism, and customer satisfaction, we have established a strong reputation as a trusted sourcing and supply-chain partner in the fastener industry.
L&W offers customers flexible sourcing options and competitive manufacturing solutions supported by an extensive network of qualified manufacturers’ partnership across Taiwan, China, and Thailand.
Our strong local connections and decades of industry experience enable us to continuously develop new quality source, identify capable suppliers, and efficiently manage projects bid case from initial inquiry to final delivery to our customer.
Our product range includes a comprehensive selection fasteners manufactured in accordance with major international specifications such as IFI (ASME), DIN, JIS, and ISO standards, as well as OEM and special-made products tailored to customer requirements.
Our manufacturing capabilities cover cold-forged, hot-forged, machined, and stamped fastener products, ranging from standard specifications to custom and hard-to-source sizes. Available materials include carbon steel, stainless steel, alloy steel, and brass, serving a wide range of industrial applications.
Beyond supplying fasteners, L&W help customers streamline sourcing, reduce procurement risks, and improve supply chain efficiency. Our team works closely with customers from product development through production and delivery, ensuring quality, competitive pricing, and dependable service every step of the way.
We warmly welcome customers and industry partners from worldwide to visit us at International Fastener Expo and discover how L&W can support for your fastening needs and new business opportunities for mutual growth and success
For more than 30 years, L&W Fasteners Company has been dedicated to providing high-quality fastening solutions to customers worldwide, with a primary foc...
TAIWAN
886-7-6170526
886-7-6103160
Since 1986, Fong Prean has been one of the leading screw manufacturers and fastener supplier in Taiwan, specializing in exporting to Europe, America, and Japan. With our full equipped facilities and extensively experiences Research and Development team, we stands out in creating innovation solutions and customized designs tailored to meet specific customer requirements and diverse market demands.
At Fong Prean, we uphold three core principles: High Productivity, Quality Assurance, and Reliable Delivery. With advanced facilities and a commitment to continuous improvement, we rigorously control and test each stage of production to minimize errors. Moreover, we offer professional services to assure the rights and interests of each party and sustainable development.
We are more than just a manufacturing company—"We live for solving problems".
Since 1986, Fong Prean has been one of the leading screw manufacturers and fastener supplier in Taiwan, specializing in exporting to Europe, America, and Jap...
TAIWAN
886-7-6968131
886-7-6963882
Thread Industrial Co., Ltd. (TICL) is a Taiwan-based fastener manufacturer founded in 1987, with nearly four decades of experience serving international customers. Headquartered in Kaohsiung, our 60,000 m² manufacturing site is supported by more than 200 employees, including a dedicated quality team, and by our manufacturing operations in Vietnam. Our installed monthly capacity includes approximately 1,500 MT of nuts, 500 MT of bolts, and 500 MT of screws. This combination gives customers flexible sourcing options, stable supply, and responsive support for both standard and customized fasteners.
TICL manufactures a broad range of carbon steel nuts, bolts, screws, and special cold-formed parts for automotive, agriculture, construction, energy and mining, general industry, railway, marine, furniture, and Japanese timber housing applications. Our nut range covers M6–M33 and 1/4"–1-1/4", including hex, square, jam, thin, high, flange, lock, cone, wheel, slotted, castle, and other special nuts. Our bolt and screw range covers M5–M24 and 1/4"–7/8", with lengths up to 300 mm, including hex cap screws, structural bolts, carriage bolts, lag screws, socket and flange head products, plow bolts, track bolts, pins, and axles. We also produce small screws from 3.0–6.3 mm in diameter and up to 150 mm in length, such as self-drilling, tapping, drywall, and chipboard screws.
One of TICL’s key strengths is vertical integration. Our in-house capabilities include spheroidizing annealing, pickling, wire drawing, cold forming, tapping, thread rolling, heat treatment, assembly, and automatic inspection. Major equipment includes 37 nut formers, 200 tapping spindles, 12 bolt forming and thread-rolling machines, 67 screw heading machines, 61 screw thread-rolling machines, three heat-treatment lines, and multiple optical and perpendicularity sorting systems. This integrated production structure helps us maintain consistent quality, shorten communication and development time, improve traceability, and respond quickly when customers need technical evaluation or corrective action.
Quality is built into every stage of our process. TICL is certified to ISO 9001 and IATF 16949 and operates an ISO/IEC 17025-accredited laboratory. We also hold Z Mark approvals for wooden construction hardware produced in Taiwan and Vietnam, while JIS certification for JIS B 1180 bolts and JIS B 1181 nuts is currently in progress. Our laboratory and inspection capabilities include tensile, hardness, torque, dimensional, coating-thickness, salt-spray, concentricity, and image-measurement testing. Automatic optical sorting is available for applications requiring enhanced dimensional or appearance control.
TICL exports to Europe, North America, and Asia and has extensive experience supporting demanding industrial supply chains. We understand the importance of material traceability, country-of-origin requirements, packaging specifications, private labeling, inspection documentation, and reliable shipment planning. Our team works closely with customers from initial drawing review and feasibility evaluation through tooling, sampling, mass production, inspection, and delivery.
Our goal is not simply to sell fasteners, but to become a dependable long-term manufacturing partner. By combining broad product capability, integrated production, quality-system discipline, experienced engineering support, and flexible Taiwan–Vietnam supply options, TICL is ready to help distributors and manufacturers develop new products, strengthen supply-chain resilience, and grow their business with confidence.
Thread Industrial Co., Ltd. (TICL) is a Taiwan-based fastener manufacturer founded in 1987, with nearly four decades of experience serving international cust...
TAIWAN
886-6-595 6111
886-6-595 5661 , 886-6-595 9361
Kwantex Research Inc. established since 1996 mainly devotes to Research and Design in the fastener field. We are one of the few enterprises who own the most fastener patents in the world; we collaborate with many outstanding fastener companies over the world on innovative products.
We hold multiple certifications including ISO 9001, ISO 14001, ISO 45001, ISO 14064-1:2018 (Greenhouse Gas Verification Statement) and ISO 14067:2018 (Product Carbon Footprint Verification Statement). We also began sourcing green electricity in Y2025 and have detailed the environmental efforts in the latest sustainability report.
Kwantex Research Inc. established since 1996 mainly devotes to Research and Design in the fastener field. We are one of the few enterprises who own the most ...
TAIWAN
886-2-2676-2002
886-2-2676-3690
A-PLUS SCREWS INC. is a manufacturer of Stainless Steel Screws from Vietnam in 2009. Specialize in material of 304, 305, 316, and 410 S.S. Our manufacturing system is certified to ISO 9001 and ISO 14001, with ISO 14064-1 verification greenhouse gas verification supporting our sustainability commitment. Contact us to discuss your next project and discover how we can become your trusted partner.
A-PLUS SCREWS INC. is a manufacturer of Stainless Steel Screws from Vietnam in 2009. Specialize in material of 304, 305, 316, and 410 S.S. Our manufacturing ...
TAIWAN
886-6-2898013
886-6-2896519
Since 1981, Chi Ning has been leading the way in the fastener industry. We provide the best comprehensive tooling period. Our machines are affordable, realiable, and best service in the industry. If you don't see the machines, you are looking for, please let us know and we will not let you down!
Since 1981, Chi Ning has been leading the way in the fastener industry. We provide the best comprehensive tooling period. Our machines are affordable, realia...
TAIWAN
886-4-777 0032
886-4-777 0302
Masterpiece Hardware Industrial Co., Ltd. is a professional manufacturer of fastening solutions for global DIY, construction, and industrial markets. We invest in smart manufacturing, automated inspection, and digital process control to ensure stable quality, traceability, and flexible production capacity. Committed to sustainability, we focus on energy efficiency, waste reduction, and safe operations. Our experienced R&D team creates customized screws and anchors based on exact technical drawings, applications, and performance requirements. We deliver reliable, sustainable, and competitive products that strengthen supply chains and support long-term growth worldwide.
Masterpiece Hardware Industrial Co., Ltd. is a professional manufacturer of fastening solutions for global DIY, construction, and industrial markets. We inve...
TAIWAN
886-7-5560180
886-7-5560174 , 886-7-5560219
Ray Fu specializes in construction products and automotive industry. Aiming at providing superior quality, Ray Fu is ISO 9001, ISO 14001, IATF 16949, TAF, EN14592, DIN EN 14566 and ETA certified to meet any customer demands.
Ray Fu specializes in construction products and automotive industry. Aiming at providing superior quality, Ray Fu is ISO 9001, ISO 14001, IATF 16949, TAF, EN...
TAIWAN
+886-4-7388372
+886-4-7386206
Mao Chuan
Professional Stamping manufacturer
Years of Experience in Cooperation with Tire 2 Automotive Supply Chain, , Mao Chuan is strictly conducted under IATF 16949/ VDA 6.1 /ISO 14001/ ISO 14064-1/ ISO 9001 quality & environmental management.
The Raw material:
-All raw materials are non-originated in or exported from Russia.
-All raw materials are from non-conflict mining countries
- Comply with EU ROHS & Reach regulations.
Heat treatment/ Surface treatment:
- Cooperation with Qualified heat treatment and surface treatment suppliers to meet automotive surface treatment regulation in tests of hardness, coating thickness, salt spray, friction of coefficient.
-
Mao Chuan has a wide range of products, including Automotive metal Parts, Spring Nuts & Clips, Nuts, Bushing/Sleeving, Washer, Deep Drawing, Clamp, Backet, Weld nut for seats belts, compression limiters and various customized component products.
You are very welcomed to provide us Drawing or Sample with specification for evaluation, we will offer you Best Price promptly.
Highly appreciated if you could give us an opportunity to cooperate with you in the nearest future!
Mao Chuan
Professional Stamping manufacturer
Years of Experience in Cooperation with Tire 2 Automotive Supply Chain, , Mao Chuan is strictly conducted under...
TAIWAN
886-6-2054981
886-6-2053032 , 886-6-2718660
Autolink International Co., Ltd. is the international sales division of MHS Group. We specialize in weld nuts, weld tubes, and related fastening products for automotive and industrial applications. Backed by MHS Group’s certified manufacturing experience, we are committed to providing consistent quality, reliable delivery, and responsive service. We believe good business starts with trust, honest communication, and understanding our customers’ needs. That’s why we focus on building long-term partnerships and growing together with customers around the world as Taiwan’s Trusted Fastener Partner. Every project begins with listening, learning, and working closely together to build confidence, earn lasting trust through collaboration.
Autolink specializes in weld nuts, weld tubes, and other fastening components for automotive and industrial applications. Backed by MHS Group’s manufacturing experience, we provide certified quality, flexible production, and dependable supply to meet different customer needs. We believe every partnership begins with listening, understanding, and honest communication. Whether you need standard products or customized solutions, we work closely with you to find the right approach. Our goal is to support your business with reliable products, responsive service, and long-term cooperation. Together, we build trust, create value, and grow as Taiwan’s Trusted Fastener Partner for years to come with every project.
Autolink International Co., Ltd. is the international sales division of MHS Group. We specialize in weld nuts, weld tubes, and related fastening products for...
TAIWAN
886-6-384 3185
886-6-384 3187
Yuh Chyang is a leading manufacturer of precision custom turning parts in Taiwan with more than 30 years expertise. We run 60+ advanced CNC machines, and continuously invest in state of art equipment to serve customer’s critical demands. Our commitment to quality is reinforced by our IATF 16949 certification , ensuring we consistently deliver products that meet the highest industry standards.
Key Fact-
*60+ Japanese CNC machines
*Market: 40% USA,60% Europe.
*Application: Automotive, Medical, Fastener, Automation, AI industry and other general industry
*IATF 16949 certified
*Machining O.D: ∅1~100mm
*Tolerance: under 0.005mm
Yuh Chyang is a leading manufacturer of precision custom turning parts in Taiwan with more than 30 years expertise. We run 60+ advanced CNC machines, and con...
TAIWAN
886-7-6281188
886-7-6285588 , 886-7-6282358
Thirty-six years, one humble technician dared to dream.
Where did it begin? The ASTER® knows.
From Germany's DIY giants to the world, our legacy has grown. Construction or automotive? We master them BOTH.
Craftsmanship in our hands, engineering in our souls.
Meet our people. Walk our factory floor.
Discover not only what we make, but who we are today.
Thirty-six years, one humble technician dared to dream.
Where did it begin? The ASTER® knows.
From Germany's DIY giants to the world, our legacy has gro...
TAIWAN
886-7-6232597
886-7-6234742
Tapping Machine, Taptitie, Drywall, Clipboard, Partical, Deck, TEK, Screw, Window, Special Screws, OEM Parts
Tapping Machine, Taptitie, Drywall, Clipboard, Partical, Deck, TEK, Screw, Window, Special Screws, OEM Parts
TAIWAN
886-7-281 2668
886-7-221 6000
Self Tapping Screws, Self Drilling Screws, Roofing Screws, Concrete Screws,
Drywall Screws, Wood Screws, Chipboard Screws, Particle Board Screws, Se
Self Tapping Screws, Self Drilling Screws, Roofing Screws, Concrete Screws,
Drywall Screws, Wood Screws, Chipboard Screws, Particle Board Screws, Se
TAIWAN
+886-7-6162089
+886-7-6162079
SELF-TAPPING SCREW, CHIPBOARD SCREW, MILL POINT SELF-DRILLING SCREW, WOOD SCREW, DECK SCREW, SELF-DRILLING SCREW, MACHINE SCREW, PER DRAWING.
SELF-TAPPING SCREW, CHIPBOARD SCREW, MILL POINT SELF-DRILLING SCREW, WOOD SCREW, DECK SCREW, SELF-DRILLING SCREW, MACHINE SCREW, PER DRAWING.
TAIWAN
886-7-6225669
886-7-6226002
Sheh Kai Precision Co., Ltd. is a Taiwan-based fastening solutions manufacturer with over 30 years of experience serving professional construction and industrial markets worldwide.
Founded in 1992, Sheh Kai specializes in Bi-Metal fastening solutions, concrete anchoring systems, stainless steel fasteners, hammer drill bits, and OEM / private label fastening programs. Our products are widely used in roofing and cladding, insulated metal panels, solar mounting systems, concrete anchoring, MEP / HVAC suspension, industrial buildings, infrastructure, and corrosion-resistant outdoor applications.
As a pioneer of Bi-Metal fasteners in Taiwan, Sheh Kai combines stainless steel corrosion resistance with hardened carbon steel drilling or thread-cutting performance. Our Bi-Metal product range includes self-drilling screws, sandwich panel screws, side lap screws, heavy-duty self-drilling screws, Wing Tek screws, window frame screws, screws for stainless steel, and Bi-Metal stainless concrete screw anchors.
For the North American construction market, Sheh Kai offers ICC-ES ESR-4376 approved carbon steel concrete screw anchors, including solutions for cracked and uncracked concrete, seismic design categories A–F, Florida HVHZ supplement, and California DSA / OSHPD / HCAI applications. Our concrete anchoring range includes hex washer head anchors and rod hanger / hex coupler head anchors for threaded rod suspension, MEP, HVAC, pipe support, cable trays, and electrical systems.
For the European market, Sheh Kai provides ETA-approved Bi-Metal screws for roofing, cladding, metal sheeting, and sandwich panel applications. We also manufacture PGM-certified SDS hammer drill bits designed for professional concrete drilling and anchor hole preparation.
Sheh Kai supports global distributors, importers, fastening brands, roofing system suppliers, and OEM customers with reliable Taiwan manufacturing, technical documentation, custom packaging, private label programs, and stable supply capability.
Our mission is to provide high-quality fastening solutions that help customers improve installation reliability, corrosion resistance, product performance, and long-term project value.
Core Products:
• ICC-ES Approved Concrete Screw Anchors
• ETA Approved Bi-Metal Self-Drilling Screws
• ETA Approved Bi-Metal Sandwich Panel Screws
• Bi-Metal Stainless Concrete Screw Anchors
• Rod Hanger / Hex Coupler Head Anchors
• Stainless Steel Fasteners
• PGM Certified SDS Hammer Drill Bits
• OEM / ODM / Private Label Fastening Solutions
Sheh Kai Precision Co., Ltd.
www.shehkai.com
Sheh Kai Precision Co., Ltd. is a Taiwan-based fastening solutions manufacturer with over 30 years of experience serving professional construction and indust...
TAIWAN
886-4-7991246
886-4-7991355 , 886-4-7991390
SELF-DRILLING SCREW, ROOFING SCREW, WINDOW SCREW, CAPPED SCREW, STAINLESS SCREW, SELF-TAPPING SCREW, MACHINE SCREW, DRYWALL SCREW, SPECIAL SCREW, CONSTRUCTION SCREW.
SELF-DRILLING SCREW, ROOFING SCREW, WINDOW SCREW, CAPPED SCREW, STAINLESS SCREW, SELF-TAPPING SCREW, MACHINE SCREW, DRYWALL SCREW, SPECIAL SCREW, CONSTRUCTIO...
TAIWAN
886-6-2052338
886-6-2053070
Founded: 1999
Business Scale: 500 tons / month
1999 Established SHAW GUANG ENTERPRISE CO., LTD.
2006 Officially certified the ISO 9001:2008.
2014 SHAW GUANG ENTERPRISE CO., LTD. officially certified ISO/TS 16949
TAIWAN
886-7-621 9106 , 886-4-2297 1981~2
886-7-621 1874 , 886-4-2297 1983
Bi-Mirth Corporation was founded in 1986, and ever since then our mission has been to strive to be one of the top fastener manufacturers through quality, innovation, and expertise.
We have evolved and expanded from a trade company with only three employees to a manufacturing company based in Gangshan, Kaohsiung with our own forming, electroplating, coating, and packaging plant with approximately 250 employees.
Bi-Mirth Corporation specializes in self-drilling, self-tapping, wood construction, and concrete screws from diameters M3 to M20 and up to 1,500 mm in length. We currently have CE, ETA, and C4 certifications for our European market, and the ICC certification for our American market.
Bi-Mirth Corporation was founded in 1986, and ever since then our mission has been to strive to be one of the top fastener manufacturers through quality, inn...
TAIWAN
886-4-2462 3555
886-4-2462 1777
Special Rivets Corp. (known as SRC) is a major global manufacturer of professional blind fastening systems. Founded in 1983, the company has grown into one of Asia's largest and most prominent suppliers of full-line blind rivets, blind rivet nuts and riveting tools. SRC exports products to over 150 countries worldwide, serving a massive client base of industrial, automotive, and construction distributors. While headquartered in Taiwan, we have scaled our manufacturing with IATF 16949 certified production facilities in mainland China and a major 45,000-square-meter facility in Thailand established to meet growing international demand in the U.S., Europe, Southeast Asia and around the world. Together, our capacity reaches over 500 million blind rivets per month. SRC offers a comprehensive "one-stop shopping" service for assembly and fastening solutions across building, automotive, aviation, and electronics industries.
Special Rivets Corp. (known as SRC) is a major global manufacturer of professional blind fastening systems. Founded in 1983, the company has grown into one o...
TAIWAN
886-2-25156802 , 886-2-25156237
886-2-25016544 , 886-2-25037045
A-Stainless has been a specialized maker of featured screws with high performing capacities for hard woods and composites, sheet metals, plastic boards, etc., Features and Benefits: 1.Window screws in A2 & 410SS MATERIAL 2.Patented designs for hard wood application 3.Stainless steel concrete screws
A-Stainless has been a specialized maker of featured screws with high performing capacities for hard woods and composites, sheet metals, plastic boards, etc....
TAIWAN
886-7-6230306
886-7-6230292 , 886-7-6230297
Fang Sheng Screw Co., Ltd. (YFS) was established in Taiwan in 1978 and has grown into a leading manufacturer of high-strength fasteners. Since its establishment, YFS has been committed to the business philosophy of “Quality, Service, and Benefit,” continuously improving its manufacturing technology, production efficiency, and quality management systems to serve customers worldwide.
Over the past decades, YFS has transformed its manufacturing operations from traditional manual hot forging to highly automated and integrated production. Today, YFS operates a comprehensive in-house manufacturing process covering acid pickling, annealing, wire drawing, cold forming, thread rolling, heat treatment, surface treatment, inspection, and final packaging. By integrating these key production processes within its own facilities, YFS is able to maintain strict control over product quality, production consistency, traceability, and delivery performance throughout the entire manufacturing chain.
YFS is particularly well known for its high-strength socket screws and fasteners, including property classes 10.9 and 12.9. Through continuous investment in manufacturing technology, automation, quality assurance, and product development, YFS has established a strong reputation for supplying reliable and high-quality fastening solutions to customers in both domestic and international markets.
In addition to standard industrial fasteners, YFS continues to expand into customized and high-value-added products with higher technical requirements. Our products are widely applied in industries such as automotive, motorcycles, commercial trucks, railway and high-speed rail systems, heavy machinery, industrial equipment, and other demanding engineering applications.
With decades of manufacturing experience, vertically integrated production capabilities, and a strong commitment to continuous improvement, YFS strives to provide customers with consistent quality, competitive solutions, reliable delivery, and professional service.
From standard high-strength fasteners to customized engineered components, YFS continues to develop its manufacturing capabilities and product portfolio to meet the evolving requirements of the global fastener industry.
YFS – Quality Fasteners, Reliable Manufacturing, Global Service.
Fang Sheng Screw Co., Ltd. (YFS) was established in Taiwan in 1978 and has grown into a leading manufacturer of high-strength fasteners. Since its establishm...
TAIWAN
886-6-2892423
886-6-2892290
MANUFACTURER & EXPORTER OF FASTENERS PRODUCT RANGE : SCREWS/BOLTS/NUTS/WASHERS IN CARBON STEEL & STAINLESS STEEL, SPECIAL PARTS FOR AUTOMOTIVE INDUSTRY.
MANUFACTURER & EXPORTER OF FASTENERS PRODUCT RANGE : SCREWS/BOLTS/NUTS/WASHERS IN CARBON STEEL & STAINLESS STEEL, SPECIAL PARTS FOR AUTOMOTIVE INDUSTRY.
TAIWAN
886-4-2693 5275
886-4-2693 5305
Established in 1990 Rong Yih Enterprise Co., Ltd. has been committed to manufacturing excellence and product innovation since its inception. We specialize in the production of Professional Pneumatic Tool and Power Tool Accessories. Our product line includes socket adaptors, bit holders, magnetic nut setter, ratchet screwdriver and other innovative products that work with power tool accessories.
Rong Yih has ISO 9001:2008 certification and our products will meet international quality and safety regulation for all professional markets. We have a comprehensive R&D team that continually strives to develop new products, enhance and improve our product offerings. Rong Yih offers customers products of the highest quality at competitive prices. We welcome the opportunity to design and manufacture your tool accessories.
TAIWAN
886-6-5952345
886-6-5955599
Chong Cheng Fastener Corp. (Est. 1989) | Automotive Fastener Specialist
• Core Expertise: Precision cold-forging and advanced tooling design.
• One-Stop Service: Full support from engineering prototypes to global logistics.
• Value Delivered: High-quality, customized solutions that boost product performance.
By combining engineering expertise with advanced manufacturing, we support the evolving global automotive market for a reliable and sustainable future.
Chong Cheng Fastener Corp. (Est. 1989) | Automotive Fastener Specialist
• Core Expertise: Precision cold-forging and advanced tooling design.
• One-Stop Serv...
TAIWAN
886-2-89131236
886-2-89131196 , 886-2-89131197
Founded in 1984, LOCKSURE has been a leading supplier of special parts in the fastener industry, dedicated to collaborating with customers to find suitable solutions for special drawing development. Our product range includes special cold-formed/stamping parts and components requiring secondary operations and assembly.
As the industry evolves, LOCKSURE has expanded to supply automotive parts to Tiers automotive customers. Our extensive experience with automotive industry requirements enables us to better meet the needs of quality-oriented clients. LOCKSURE is currently in the process of obtaining IATF 16949 certification to further enhance our commitment to quality. We have also invested in three factories to strengthen our manufacturing capabilities and product variety.
With over 30 years of experience exporting to the USA, Europe, South America, and the Middle East, LOCKSURE is committed to providing comprehensive services to our clients. Our wide range of product lines, expertise in part development, and rigorous quality control make LOCKSURE your best choice for automotive fasteners.
Founded in 1984, LOCKSURE has been a leading supplier of special parts in the fastener industry, dedicated to collaborating with customers to find suitable s...
TAIWAN
886-7-633 1456 , 886-7-633 1500
886-7-633 1469
Shuenn Chang Fa Enterprise Co., Ltd (SCF) has established since 1984. We specialized in customized long construction fasteners and other modified screws. SCF has acquired IATF16949, ISO 14001, ISO/IEC 17025 and EN 14592, CNS certificate, ETA certificate: ETA-18/1100, D-U-N-S certificate#656265279. Over 40 years’ experience in innovation has successfully helped our customers turn their ideas and design into reality. Design next generation at SCF.
Shuenn Chang Fa Enterprise Co., Ltd (SCF) has established since 1984. We specialized in customized long construction fasteners and other modified screws. SCF...
TAIWAN
886-7-626 1398
886-7-626 1397
AIMREACH WAS FOUND IN 1993, FOR STANDING ON FASTENERS BUSINESS MORE THEN 20 YEARS, WE KEEP IMPROVING OURSELVES ON PRODUCTION SKILL AND SERVICE. WITH OUR STRONG LINES OF BI-METAL SCREW/STAINLESS STEEL SCREW/FIXING ANCHORS/GYPSUM BOARD/WOODEN CONTSTUCTION PRODUCTS, WE WILL PROVIDE BETTER THEN BETTER FOR THE FUTURE.
AIMREACH WAS FOUND IN 1993, FOR STANDING ON FASTENERS BUSINESS MORE THEN 20 YEARS, WE KEEP IMPROVING OURSELVES ON PRODUCTION SKILL AND SERVICE. WITH OUR STRO...
TAIWAN
886-6-2360687
886-6-2362687
Based in Taiwan and Suzhou China, Spec Products Corp. has been an Integrated Industrial Parts manufacturer and supplier since 2001.
Our factory is certified to IATF 16949 and ISO 9001, while our lab is certified to A2LA (American Association for Lab Accreditation). We exported more than 20,000 items made to customers’ prints or samples per year to USA, Europe, Japan and China, including cold/ hot forging, turning, plastic ejection and stamping, etc., from either our own or sub-contracted factories. We offered best manufacturing recommendation for cost saving and easier assembly. VMI (Vendor Management Inventory) and well-designed logistics have been the value for our long-term customers. Besides, we also owned product patents including Nordic Bolt & Nut (Wedge Locking Fastener), Spec Locking Washer, Aluminum H.T Processes and some assembly devices, etc.
Based in Taiwan and Suzhou China, Spec Products Corp. has been an Integrated Industrial Parts manufacturer and supplier since 2001.
Our factory is certified ...
TAIWAN
886-6-5551618
886-6-5551683
Fong Wuns is a Taiwan-based fastener manufacturer with over 30 years of experience in producing hex flange nuts and special parts per print. Our in-house capabilities include forming, tapping, locking, sorting, and packaging, supported by well-managed processes and equipment. ISO 9001 and IATF 16949 certified, from first inquiry to final delivery, we work closely with our customers to ensure transparency, reliability, and mutual growth at every step. We believe that smooth, efficient processes are the foundation of every successful partnership and we welcome the opportunity to be your trusted partner.
Fong Wuns is a Taiwan-based fastener manufacturer with over 30 years of experience in producing hex flange nuts and special parts per print. Our in-house cap...
TAIWAN
886-6-239 3616
886-6-239 8999
HU PAO INDUSTRIES CO., LTD., established in 1999, specializes in the research, development, manufacturing, and sales of cold-forged nuts and special fasteners. With more than 27 years of manufacturing experience, the company is committed to providing high-quality, high-precision, and highly reliable fastening solutions. Its consistent product quality has earned the trust and recognition of customers in Taiwan and around the world.
Guided by the principles of “Quality First, Integrity, Continuous Improvement, and Customer Satisfaction,” HU PAO continuously enhances its manufacturing technologies and quality management capabilities while actively expanding its presence in international markets. Its products are exported to the United States, Canada, Mexico, the United Kingdom, France, Spain, Italy, Sweden, Poland, and various countries and regions across Asia, enabling the company to establish long-term and stable partnerships with customers worldwide.
HU PAO’s major products include weld nuts, flange nuts, prevailing torque lock nuts, special-form nuts, and a wide range of cold-forged metal components customized according to customer drawings and specifications. These products are widely used in automotive components, industrial equipment, construction machinery, construction hardware, agricultural machinery, and other precision machinery applications.
The company is certified to IATF 16949 and ISO 9001 quality management systems and has established a comprehensive quality assurance system. Standardized procedures are implemented throughout the entire production process, from incoming raw material inspection and manufacturing to finished-product shipment. HU PAO’s facilities are equipped with cold forging, tapping, automated assembly, and 100% optical sorting equipment, as well as comprehensive testing capabilities, including proof load testing, hardness testing, thread inspection, coating thickness measurement, and salt spray testing. These capabilities ensure that every production batch complies with customer specifications and applicable international standards.
HU PAO places strong emphasis on product development and technical support, offering one-stop solutions that cover new product development, process design, tooling and die development, PPAP documentation, quality improvement, and customized manufacturing. Through close collaboration with customers, the company helps shorten product development lead times and enhance overall product competitiveness.
At the same time, HU PAO actively promotes smart manufacturing, continuous quality improvement, and sustainable development, while responding to international regulations and customer requirements, including REACH, RoHS, IMDS, CMRT, EMRT, CBAM, and PPWR.
With a commitment to consistent quality, on-time delivery, competitive costs, and professional service, HU PAO INDUSTRIES CO., LTD. strives to be a trusted global partner in the fastener industry and to create long-term value together with customers worldwide.
HU PAO INDUSTRIES CO., LTD., established in 1999, specializes in the research, development, manufacturing, and sales of cold-forged nuts and special fastener...
TAIWAN
886-7-3452422
886-7-3450343
Ji Li Deng is an ISO-certified supplier in Taiwan and our laboratory is ISO 17025 accredited by TAF.
Ji Li Deng is an ISO-certified supplier in Taiwan and our laboratory is ISO 17025 accredited by TAF.
TAIWAN
886-2-26599338
886-2-26599328
Din Ling Corp., established in 1989, is a professional screw manufacturer headquartered in Taipei, Taiwan, with major manufacturing facilities in Kaohsiung, Taiwan and Ho Chi Minh City, Vietnam.
With over 35 years of manufacturing experience, we are a fully integrated manufacturer specializing in high-performance fastening solutions. Our extensive production capabilities and advanced manufacturing technologies enable us to serve customers across a wide range of industries and applications.
Our product portfolio includes Decking Screws, Automotive Screws and fasteners, Chipboard Screws, Drywall Screws, Self-Drilling Screws, Self-Tapping Screws, Wood Construction Screws and special screws.
Our facilities are certified to international standards, including IATF 16949, ISO 9001, CE, ETA, and BSCI, demonstrating our commitment to quality, reliability, and responsible manufacturing.
Din Ling Corp., established in 1989, is a professional screw manufacturer headquartered in Taipei, Taiwan, with major manufacturing facilities in Kaohsiung, ...
TAIWAN
886-7-6972191
886-7-6965745 , 886-7-6963954
Founded in 1974, SHIN JAAN (S.J.), headquartered in Kaohsiung, Taiwan, is a professional manufacturer of standard bolts and OEM customized parts.
Our main products include Hex Bolts, Hex Flange Bolts, Shack Bolts,
Weld Bolts, Carriage Bolts, Plow Bolts,Wheel Bolts and various automotive components.
With over 50 years of expertise, SHIN JAAN is committed to high-quality
manufacturing and continuous innovation.
Our products are 100% exported, with 70% shipped to the U.S. market
and 30% to Europe and other regions, earning long-term trust from global customers.
The company is certified to ISO 9001, IATF 16949, and TAF ISO/IEC
17025 Laboratory Accreditation, ensuring compliance with international
standards and meeting the stringent quality requirements of the automotive industry.
Founded in 1974, SHIN JAAN (S.J.), headquartered in Kaohsiung, Taiwan, is a professional manufacturer of standard bolts and OEM customized parts.
Our main pr...
TAIWAN
886-2-2298 9168
886-2-2298 8968
Founded in 1998, ScrewTech Industry Co., Ltd. has established a strong presence in the precision fastener industry, specializing in precision screws ranging from M1 to M14 and demonstrating outstanding capabilities in customized manufacturing. Our strength lies in integrating a complete manufacturing process, from cold forming and secondary processing to surface treatment, supported by advanced intelligent monitoring systems to ensure exceptional precision and consistent quality.
We offer a wide range of materials, including low-carbon steel, alloy steel, stainless steel, and copper, enabling us to meet the demanding requirements of various industries such as electronics, automotive, medical devices, and machinery.
Quality is at the core of our competitiveness. ScrewTech strictly adheres to international standards, including ISO 9001, ISO 14001, ISO 45001, and IATF 16949, while fully complying with RoHS and REACH environmental requirements.
From incoming material inspection to final packaging and shipment, every stage is closely monitored using precision inspection equipment to ensure high yield and consistent product quality. With reliable production capacity and a strong commitment to ESG and sustainable development, ScrewTech delivers precision fastener solutions that meet the modern industry's evolving demands for efficiency, environmental responsibility, and superior quality.
Founded in 1998, ScrewTech Industry Co., Ltd. has established a strong presence in the precision fastener industry, specializing in precision screws ranging ...
TAIWAN
886-6-2993788
886-6-2953939
ECONOMIC DEVELOPMENT BUREAU,KAOHSIUNG CITY GOVERNMENT / TAIWAN INDUSTRIAL FASTENERS INSTITUTE
ECONOMIC DEVELOPMENT BUREAU,KAOHSIUNG CITY GOVERNMENT / TAIWAN INDUSTRIAL FASTENERS INSTITUTE
TAIWAN
886-7-6317171
886-7-6317005 , 886-7-6315152
Dragon Iron Factory Co., Ltd. is a Taiwan-based fastener manufacturer established in 1973. With strong OEM/ODM capabilities, Dragon Iron serves the construction and industrial markets globally. We are committed not only to manufacturing high-quality fasteners but also to providing responsive customer service, technical support, and reliable supply chain solutions tailored to our customers' needs. Our dedication to quality, innovation, customer satisfaction, and long-term partnerships has made us a trusted global fastener supplier for more than 50 years.
Dragon Iron Factory Co., Ltd. is a Taiwan-based fastener manufacturer established in 1973. With strong OEM/ODM capabilities, Dragon Iron serves the construct...
TAIWAN
886-7-621 7249
886-7-622 0069
Chang Yi Bolt is a Taiwan-based fastener manufacturer. it was established in 1987 by Mr. Hsin Teng Chen and Ms. Bertha Lee. Chang Yi is located in Gangshan, Kaohsiung where is the biggest scale of fastener valley. It was a small scale factory with few employees and now it becomes one of most competitive screw and fastener manufacturer in GangShan Area. In 2013, Citi TV selected eight of the most competitive fastener manufacturers field and take a series of video clips. Chang Yi was one of the eight. Due to strict quality control and delivery-on-time policies Chang Yi earns good reputation in the markets. Our main export markets cover Europe, South America, North America and Australia.
TAIWAN
886-7-787-9896
886-7-787-6568
Chirek fastener specializes in bi-metal self-drilling screws, anti-corrosion self-drilling coating screws, heavy structural bolts, stainless steel bolts, hex socket cap screws, anchors, nuts and washers. Not only can we provide standard products such as ASTM, JIS and DIN but also can offer customized products according to our clients’ design.
Chirek fastener specializes in bi-metal self-drilling screws, anti-corrosion self-drilling coating screws, heavy structural bolts, stainless steel bolts, hex...
TAIWAN
+886-7-3726969
+886-7-3737979
MAC is an IATF 16949-certified manufacturer specializing in custom precision turned parts for a wide range of industries. From prototype development to serial production, we work closely with customers to optimize everything, ensuring efficient production and performance.
Our flexible manufacturing network enables us to provide cost-effective solutions for a wide range of materials and processes.
Besides, the commitment to quality goes beyond manufacturing. We validate critical requirements through advanced inspection equipment to ensure every part performs exactly as intended.
At MAC, flexibility is not just about making things happen, it's about delivering the right solution with precision, consistency, and confidence.
MAC is an IATF 16949-certified manufacturer specializing in custom precision turned parts for a wide range of industries. From prototype development to seria...
TAIWAN
886-7-788 5068
886-7-788 5086
METAL FASTENERS CO. LTD., Made in Taiwan.
From self-clinching fasteners and insert nuts to customized fasteners, our 24/7 automated production lines and CCD sorting systems ensure consistent quality, fast turnaround, and accurate inspection for every shipment.
Materials: Steel,Brass,SUS,Aluminum
METAL FASTENERS CO. LTD., Made in Taiwan.
From self-clinching fasteners and insert nuts to customized fasteners, our 24/7 automated production lines and CCD...
TAIWAN
886-7-6116116
886-7-6196601
Sheh Fung is a leading company in screw manufacturing in Taiwan. Since 1973 Sheh Fung has established themselves as a leader in screw design and technology. We have grown as a company of high quality products with a trusted well established reputation and we also do OEM or ODM for well-know international fastener brand.
We specialize in small construction screws like wood screws, self-drilling screws, self -tapping screws, drywall screws, chipboard screws, machine screws and many others, also available in stainless steel material. Sheh Fung also obtained IATF16949 certificate to provide automotive fasteners, which further improved Sheh Fung’s manufacturing capabilities. In addition, we have our own packing facility to meet the different packing requirement like industrial area, retail area or DIY area etc..
Production starts from wire, heading, forming, threading, heat treatment, plating or coating till last packing, each stage will be inspected by QC people before entering to next stage. The laboratory has also obtained the A2LA certificate to endorse the quality. For special specs, Sheh Fung can provide its design and production skill to win the trust from our customers.
Sheh Fung is looking to move forward in the screw market with partners who are looking to do the same.
Sheh Fung is a leading company in screw manufacturing in Taiwan. Since 1973 Sheh Fung has established themselves as a leader in screw design and technology. ...
TAIWAN
886-7-6990069
886-7-6997885
SHEN CHOU FASTENERS Your Future-Ready Partner in Global Fastening | Est. 1989, Taiwan
A premier manufacturer of high-quality stainless steel fasteners with 35+ years of expertise. We serve North America, Europe, Japan, and the Middle East with a full range of standard parts (DIN, IFI, ISO) and customized OEM/ODM solutions.
Why Shen Chou?
• Uncompromising Quality: ISO 9001 & CE EN 14592 certified.
• Dual Transformation: Smart IoT automation paired with eco-friendly manufacturing (ISO 14064-1 carbon inventory).
SHEN CHOU FASTENERS Your Future-Ready Partner in Global Fastening | Est. 1989, Taiwan
A premier manufacturer of high-quality stainless steel fasteners with 3...
TAIWAN
886-7-696 0597 #230
886-7-696 3606
Homn Reen is a large-scale professional small screw manufacturer established in 1985. We provide a wide variety of specialty and standard screws. We demand stable quality, encourage innovation, and deliver prompt customer service day-to-day.
Homn Reen has established two fully integrated factories. The Taiwan-based factory is 20,000 square meters, and the Vietnam-based factory is 100,000 square meters. Our products are sold domestically and internationally, and shipments average 21,000 metric tons annually.
On behalf of the staff of Homn Reen, we look forward to the opportunity to collaborate and grow together.
Homn Reen is a large-scale professional small screw manufacturer established in 1985. We provide a wide variety of specialty and standard screws. We demand s...
TAIWAN
886-4-23399907
886-4-23398677
Since 1993, EVEREON INDUSTRIES, INC. (YDS Hose Clamp) was founded; we devote ourselves to provide various hose clamps with installation easily, durableness and safety for our customers. Non-perforated Hose Clamp, Perforated Hose Clamp, High Torque Hose Clamps, Ear Clamps, CV Joint Boot Clamps, Customized Clamp.
Since 1993, EVEREON INDUSTRIES, INC. (YDS Hose Clamp) was founded; we devote ourselves to provide various hose clamps with installation easily, durableness a...
TAIWAN
886-7-6073598
886-7-6073597
Founded in 2007 Katsuhana, though we are NOT the big and long history established, however, our professional team-works have the experiences more than 20 years in the fasteners/screws , NOT only in screws, but also expending to bolt, nut, washer, etc. Moreover, we would like to emphasis on our strong and main products are on “small screws” fields, such as drywall, wood, particle board, self drilling screw, tapping, roofing, collated, machine, thread rolling screw, etc.
Over the years, Katsuhana products has evolved into the interiors, outdoors, light steel frames, wood/steel applications, 3C, electric products, furniture, home appliances, etc. the leader in providing the most innovative and technologically-advanced integrated supply solutions to offer the high-stable quality to keep on long-terms to the clients.
The leadership of Katsuhana strives to ensure the satisfaction and continuous improvement of three important groups: our clients, our suppliers and members of our valued Katsuhana Team.
TAIWAN
886-7-5363200
886-7-5363280
Gofast, established in 1986, is a leading supplier of automotive, industrial fasteners and engineering components for the global OEM market. Certified with ISO9001 and IATF16949 since 2008.
Gofast, established in 1986, is a leading supplier of automotive, industrial fasteners and engineering components for the global OEM market. Certified with I...
TAIWAN
+886-6-578-3015
+886-6-578-2494
Founded in 1988, Taiwan-based De Hui Screw is a premier manufacturer specializing in construction fasteners. We offer a comprehensive range of high-quality products, including self-drilling, stainless steel, roofing, decking, and drywall screws, alongside custom manufacturing tailored to drawings or samples.
Driven by our core values—superior quality, exquisite packaging, prompt delivery, and thoughtful service—we are your trusted partner for global fastener solutions. Visit our booth to explore how we can support your business!
Founded in 1988, Taiwan-based De Hui Screw is a premier manufacturer specializing in construction fasteners. We offer a comprehensive range of high-quality p...
TAIWAN
886-7-3740160
886-7-3746310
Founded in 1979 in southern Taiwan, Jet Fast is a professional manufacturer in Blind Fasteners with IATF16949 certificate. The line encompasses more than 400 items in different sizes & materials. We offer the high-quality Rubber Nut-Insert & Metal Rivet Nut with speedy service to facilitate customer’s requirement of various applications. Our products are mainly used on automotive, industry and DIY market for architecture among Europe and North America with a great worldwide reputation. The dimension can be customized according to customer’s needs.
Rubber nut-insert: function as a threaded insert and fastener; effectively seal against air or liquid leakage at the assembled joint. Good to reduce vibration and absorb the shock and noise. It is an ideal fastener for automotive assembling.
Metal rivet nut: maintenance free alternative to welding, tapping or conventional nut+bolt.
Founded in 1979 in southern Taiwan, Jet Fast is a professional manufacturer in Blind Fasteners with IATF16949 certificate. The line encompasses more than 400...
TAIWAN
886-7-6965658 , 886-7-6974225
886-7-6962876 , 886-7-6968859
Channg Chin Industry Corp established in 1972 in Kaohsiung, Taiwan. Channg Chin is an IATF 16949 certified screw manufacturer specializing in customized fasteners for the automotive, electronics, and industrial fields.
With dedicating in production, we have highly flexibility to produce per print and per customer request. Product ranges from Machine screws, SEMS screws, Tapping screws, MAThread with patent, etc. With our commitment to quality and price, we develop well reputation among clients in the field, which is also evidenced in acquisition of IATF 16949, ISO 9001, ISO 14001, ISO 17025, EN 14592 and EN14566.
Channg Chin Industry Corp established in 1972 in Kaohsiung, Taiwan. Channg Chin is an IATF 16949 certified screw manufacturer specializing in customized fast...
TAIWAN
+886-7-701-3498
+886-7-701-9649
RI YUE XING PRECISION INDUSTRIAL CO., LTD., established in 1987 in Taiwan, specializes in CNC precision machining for custom metal components under 20 mm. We provide OEM/ODM manufacturing using Swiss-type CNC lathes, CNC turning, milling and 5-axis machining for automotive, medical, electronics, bicycle and industrial applications. Custom CNC machined parts including shafts, pins, bushings, connectors, fittings and precision fasteners in stainless steel, aluminum, brass, copper and titanium with tight tolerances for OEM industries worldwide.
RI YUE XING PRECISION INDUSTRIAL CO., LTD., established in 1987 in Taiwan, specializes in CNC precision machining for custom metal components under 20 mm. We...
TAIWAN
886-7-6211759
886-7-6221859
TAIWAN FASTENER MANUFACTURER SINCE 1979
Jau Yeou Industry Co., Ltd. is one of Taiwan’s top 10 leading professional fastener manufacturers, backed by decades of experience in producing high-quality screws and global fastening solutions."
Operating a fully integrated production line from wire drawing to automated packaging, we deliver uncompromised quality and on-time delivery. Jau Yeou remains dedicated to sustainable, green manufacturing."
OUR PRODUCTS
Drywall Screws | Self-Drilling Screws | Self-Tapping Screws | Construction Screws | Roofing Screws | Collated Screws | Stainless Steel Screws | Bi-Metal Screws | Customized Fasteners
WHY JAU YEOU?
✓ Made in Taiwan
✓ Decades of Manufacturing Experience
✓ Global Supply Experience
✓ ISO 9001:2015
✓ IATF 16949:2016
✓ ISO 14001:2015
✓ EN 14566 / EN 14592
✓ BSCI
✓ OEM & Customized Solutions
Engineered for Excellence. Certified for Trust.
VISIT US AT IFE 2026
BOOTH 3941 | OCTOBER 8–9, 2026
Phoenix Convention Center | Phoenix, Arizona, USA
Let’s build stronger business together.
TAIWAN FASTENER MANUFACTURER SINCE 1979
Jau Yeou Industry Co., Ltd. is one of Taiwan’s top 10 leading professional fastener manufacturers, backed by decades ...
TAIWAN
886-7-6227799
886-7-6224676 , 886-7-6223606
Anchor Fasteners Industrial Co., Ltd., founded in Taiwan in 1986, is a professional manufacturer of fastening solutions with operations in Taiwan, Vietnam and China. Our products include rivet nuts, interlock rivets, structural riveting systems, clinching fasteners, and automotive fasteners. We support both standard and custom OEM/ODM projects, from design and tooling to testing, production, sorting and packaging. Our Taiwan facility has an annual capacity of up to 12,000 tons, supported by modern equipment, SPC management and a TAF-accredited laboratory. Certified to IATF 16949, ISO 9001, ISO 14001, ISO 45001 and ISO 14064-1, we are committed to consistent quality, stable supply and responsive technical service for customers worldwide.
Anchor Fasteners Industrial Co., Ltd., founded in Taiwan in 1986, is a professional manufacturer of fastening solutions with operations in Taiwan, Vietnam an...
TAIWAN
886-4-7331688
886-4-7331699
Manufacturing is a step-by-step industry,hard but solid.Since our first Hollow rivet was manufactured in 1975,followed by blind rivets,rivet nuts,rivet screws,special screws etc.series of fasteners,For more than 40 years.FILROX have continuously improved on technology and the quality of our products
Manufacturing is a step-by-step industry,hard but solid.Since our first Hollow rivet was manufactured in 1975,followed by blind rivets,rivet nuts,rivet screw...
TAIWAN
886-7-7278089
886-7-7278996
Taiwan Shan Yin International Co., Ltd. (TSY) is committed to developing high-performance fastening solutions designed for modern construction and industrial applications. Our product portfolio covers patented construction screws, standard construction screws, industrial fasteners, self-tapping screws, self-drilling screws, automotive fasteners, electronic screws, and customized OEM / ODM fastening products to support a wide range of industries and market demands.
Beyond offering a comprehensive fastening product range, TSY continuously invests in patented fastening technologies, multi-material solutions, and high corrosion resistance coating systems to help global partners improve installation efficiency and strengthen market competitiveness.
Through optimized thread geometry, reverse-tip technology, cutting structures, and driving-performance enhancements, TSY screws deliver faster installation, reduced wood splitting risks, and improved overall fastening performance across a wide range of applications, including timber construction, decking, outdoor projects, steel framing, industrial installations, and diversified fastening applications.
TSY's multi-material fastening solutions are designed for wood, plastic boards, drywall, steel sheets, and selected concrete applications, helping customers simplify inventory management and improve installation convenience. In addition, SKT® Coating is engineered for outdoor and high-humidity environments, providing long-term anti-corrosion protection and durability for demanding construction conditions.
Beyond product innovation, TSY offers flexible OEM / ODM partnership support backed by manufacturing capabilities in Taiwan and Malaysia, ensuring stable supply, rapid development, and global market support.
More than a fastener manufacturer, TSY is a fastening solution partner dedicated to helping customers build stronger market competitiveness and co-create premium advantage through innovative fastening solutions and long-term partnership support.
Taiwan Shan Yin International Co., Ltd. (TSY) is committed to developing high-performance fastening solutions designed for modern construction and industrial...
TAIWAN
886-2-25223248
886-2-25365500
JC Grand is a leading manufacturer and exporter of industrial fasteners and metal hardware components. For nearly 50 years, JC Grand has been serving customers globally with an extensive line of high quality screws, nuts, bolts, washers, anchors, and customized hardware products from its wholly-owned factories in Taiwan and China. All of our locations are ISO 9001 certified, and singularly focused on delivering products and services of exceptionally consistent quality to our clients worldwide.
JC Grand specializes in smaller diameter (< 1/2"), externally threaded, standard/custom, carbon and stainless steel fasteners. Both Taiwan and China manufacturing locations include our own cold heading, threading and pinch-point forging machines, continuous heat treatment lines (neutral hardening, carburizing, carbo-nitriding), electroplating, proprietary zinc-tin alloy coating, dip spin topcoat lines, optical sorting, and custom packaging lines.
JC Grand is a leading manufacturer and exporter of industrial fasteners and metal hardware components. For nearly 50 years, JC Grand has been serving custome...
TAIWAN
886-7-633 1111
886-7-633 1110
There are countless prepacked fasteners & parts suppliers on the market, but only a few of them have what it takes to tap into the supply chains controlled by worldly known hardware and parts brands. Kang Good Enterprise Co., Ltd., established 19 years ago, is also among the few excellent suppliers. Inheriting the superior manufacturing technique and fastidiousness about customer service from its affiliated company, Zenith Good Enterprise Co., Ltd., Kang Good was founded in 2007 as a business specialized in offering OEM and ODM service for prepacked fasteners in order to satisfy the growing market demand.
Capabilities for Standard and Customized Parts;
All Customers Can Find Their Own Suitable Products
Compared to other companies in the same trade, Kang Good offers a more diverse range of prepacked fasteners. Its average monthly output reaches around 5-7 million packs and the volume of materials used per month approximates to 100 tons. Most of its products are sold to America (40%), Asia (35%), and Europe (20%) and are applied to houseware, assembled furniture, 3C electronics, sanitary ware, and many other DIY-related industries. Several worldly known brands and trademarks also maintain close and long-term collaboration with Kang Good. In the past, Kang Good once developed a new manufacturing process to support a customer’s R&D of machined products, which later helped the customer reduce the cost and increase the capacity and made the customer treat Kang Good with increased respect.
Many companies in collaboration with Kang Good said, “Kang Good has quite excellent capabilities for customized service according to each customer’s demand and required specifications.” It can not only provide standard prepacked fasteners in specifications of 4cm X 4cm to 18cm X 10cm, but can also provide different combinations of at least 1-8 categories in each pack as per customer’s request, user manuals, and various packing materials such as PE, OPP, CPP, etc. In addition, if requested, it can also provide customers with value-added service like printing of company logos, trademarks, brand colors, bar/QR codes, etc. Such an all-inclusive service allows customers to have their own demands immediately satisfied by reaching out to only one contact approach.
Using Facilities Only from Leading Brands;
Stable Yield Rate Control
Valuing product quality and perfect service a lot, Kang Good has its manufacturing procedure fully compliant with the ISO quality management system and further expanded its factory to Alian Dist. (Kaohsiung) in 2020. More than a hundred sets of multi-stroke forming machines, progressive-die stamping machines, heading machines, thread rolling machines, thread tapping machines, automatic fastener mixing & packaging machines, and optical sorting machines manufactured by Chun Zu, Chien Tsai and other leading machine manufacturers arrayed in the factory fully demonstrate Kang Good ‘s dedication to keeping its manufacturing procedure management above the level at all times. All pre-packed products are required to undergo precision inspection before they are allowed to be shipped out of the factory, so Kang Good can always keep the defective rate within 200ppm.
Kang Good noted, “Stable quality, favorable prices, punctual lead time, superior R&D ability, and overseas operations are all our advantages. In the face of the upcoming era of high goods prices and wages, the market demand for do-it-yourself products would definitely increase. As a result, we’ll continue to expand our service in this field and extend our reach to more markets based on the idea of sustainable operation.”
There are countless prepacked fasteners & parts suppliers on the market, but only a few of them have what it takes to tap into the supply chains controll...
TAIWAN
886-7-6223885
886-7-6227776
Jung Shen Technology
Focus on product management & specifications
We have developed automatic different metals welding and automatic full inspection equipment and
high-frequency current heat treatment equipment. With the equipment of the traditional screw industry,
we have successfully developed and produced fast and efficient products. With high-quality and stable manufacturing technology, it can provide a large amount of demand for composite screws in the world.
Conserve energy to reduce carbon emission
Reduce raw material requirements
In line with the expectation of environmental protection, the Bi-Metal screws developed by Jung Shen Technology hopes to contribute to global environmental protection. High-quality Bi-Metal screws can improve the durability of the building itself, thereby reducing the demand for raw materials to achieve the goal of energy saving and carbon reduction.
TAIWAN
886-7-6211600
886-7-6212811
YAOWAY Technology Co., Ltd. is a leading total-solution provider in the global fastener and screw manufacturing industry, backed by over 15 years of solid technical expertise and deep supply chain integration. Based in Taiwan—the world’s premier hub for high-quality fastener production—YAOWAY delivers an end-to-end service model that spans precision mold design, raw material wire selection, advanced high-speed forming machinery, and finished standard/customized fasteners.
Complete Turnkey Production Line Solutions
Our unique competitive edge goes far beyond exporting hardware components. YAOWAY specializes in full-scale manufacturing integration, helping global clients design, build, and launch complete screw production lines from scratch. Through our in-house engineering capabilities—including custom mold matching, machinery synchronization, and strict pre-delivery testing—we ensure every equipment package arrives fully optimized for immediate, seamless mass production. This comprehensive "Turnkey Solution" enables our international partners to establish scalable and efficient local manufacturing capabilities with minimal setup risk.
Integrated Fastener Supply Chain & OEM/ODM Engineering
Leveraging Taiwan’s comprehensive industrial ecosystem, YAOWAY provides a seamless, one-stop supply chain service for global buyers. We excel in specialized product development and reverse engineering, translating complex technical drawings into high-precision, customized special screws. Our complete supply chain capabilities also encompass large-volume steel wire drawing, specialized heat treatment, surface coating, and rigorous quality control.
ISO 9001 Certified Quality & Product Portfolio
Quality, consistency, and traceability are at the heart of our operations. YAOWAY operates under an ISO 9001 quality management system, ensuring that all products and manufacturing processes adhere to stringent international standards. Our main export product lines include:
Construction & Structural Fasteners: Heavy-duty anchors, timber screws, and structural connectors.
Self-Tapping & Self-Drilling Screws: Engineered for smooth penetration, high torque resistance, and superior holding power.
Precision Machine Screws & Special Fasteners: Custom-engineered in carbon steel and stainless steel for diverse industrial applications.
Industrial Steel Wire & Tooling: High-grade drawn wire and precision forming molds tailored for volume manufacturing.
Driven by technical innovation, robust quality control, and decades of international trade experience, YAOWAY is your most dependable strategic partner for total fastener manufacturing solutions.
YAOWAY Technology Co., Ltd. is a leading total-solution provider in the global fastener and screw manufacturing industry, backed by over 15 years of solid te...
TAIWAN
886-6-264 3888 ext.218
886-6-292 5581
QUINTAIN STEEL CO., LTD.
From Billet to Fasteners – Integrated Manufacturing You Can Rely On
Founded in Taiwan, Quintain Steel Co., Ltd. is an integrated steel and fastener manufacturer with extensive experience in steel processing and international trade.
Our strength lies in our vertically integrated manufacturing capability, covering the production process from steel billet, wire rod and wire processing to threaded rod and finished fasteners. By managing key production stages within our integrated manufacturing system, Quintain Steel is able to maintain consistent quality, reliable supply and greater production flexibility for customers worldwide.
Our fastener division specializes in a wide range of construction and industrial screws, including:
Drywall Screws
Decking & Chipboard Screws
Self-Drilling Screws
Roofing Screws
Collated Screws
Customized Fasteners
We offer various head styles, thread designs, points and surface finishes to meet different applications and market requirements. Our screw manufacturing facility has an annual production capacity of approximately 18,000 metric tons, supported by our upstream steel and wire processing capabilities.
In addition to fasteners, Quintain Steel also manufactures threaded rods for construction and industrial applications, with an annual production capacity of approximately 24,000 metric tons.
Serving customers across international markets, we understand the importance of consistent quality, competitive cost, stable delivery and responsive service. We continuously enhance our manufacturing capabilities and product development to support the evolving needs of professional distributors, importers and construction supply companies.
Quintain Steel – Integrated from Steel to Fasteners.
Built for Quality. Built for Reliability.
e-mail: u10701002@quintain.com.tw
International Trade Department
Manager
Ken Wang
QUINTAIN STEEL CO., LTD.
From Billet to Fasteners – Integrated Manufacturing You Can Rely On
Founded in Taiwan, Quintain Steel Co., Ltd. is an integrated s...
TAIWAN
886-6-2494699
886-6-2494688
Rivet nuts, Insert nuts, Flange nuts, Round Nuts, Flange Welding Nuts, Nylon Insert Flange Nuts, Spreader Nuts, Shoulder Nuts, Chain Roller, Bushing, Spacer, Special Nuts
Rivet nuts, Insert nuts, Flange nuts, Round Nuts, Flange Welding Nuts, Nylon Insert Flange Nuts, Spreader Nuts, Shoulder Nuts, Chain Roller, Bushing, Spacer,...
TAIWAN
886-6-2318800
886-6-2318822
With 60 years of expertise, Charng Guey delivers advanced, customizable thread rolling solutions.
With 60 years of expertise, Charng Guey delivers advanced, customizable thread rolling solutions.
TAIWAN
886-2-27817892
886-2-27764387
• ATS is a third-party inspection company, specializing in Fasteners &
hardwares. ATS was found in1976.
• Export on automobile & fasteners parts.
• ATS is a third-party inspection company, specializing in Fasteners &
hardwares. ATS was found in1976.
• Export on automobile & fasteners parts.
TAIWAN
886-7-6213388
886-7-6234896 , 886-7-6221919
Wattson Fastener, a professional screw manufacturer, founded in 1982, with over 40 years of manufacturing experience.
Main product: Drywall Screw, Concrete Screw, Self-drilling Screw. Chipboard Screw and Roofing Screw.
Wattson Fastener, a professional screw manufacturer, founded in 1982, with over 40 years of manufacturing experience.
Main product: Drywall Screw, Concrete ...
TAIWAN
886-2-2602 7766
886-2-2601 8555
FONTEC SCREWS CO., LTD., established in 1978, is a Taiwan-based manufacturer with nearly 50 years of expertise in custom cold forged components and specialty fastening solutions. Headquartered in Taiwan, with manufacturing facilities in both Taiwan and China, we provide high-quality, precision-engineered, and cost-effective OEM manufacturing services to customers worldwide.
Our core competency lies in the development and production of custom cold forged components based on customer drawings and specifications. Supported by advanced cold forging technology, in-house tooling development, and extensive manufacturing experience, we provide comprehensive services from engineering consultation, Design for Manufacturability (DFM), tooling development, prototyping, and PPAP support to full-scale production.
Our product portfolio includes custom cold forged components, rivets, special screws, and precision fasteners, serving a wide range of industries including automotive, power tools, hand tools, outdoor equipment, industrial machinery, furniture hardware, and electronics.
Certified to IATF 16949, FONTEC is committed to delivering consistent quality, reliable lead times, and flexible manufacturing solutions. Today, we proudly serve customers across North America, Europe, and other global markets, building long-term partnerships through engineering expertise, manufacturing excellence, and responsive customer support.
FONTEC SCREWS CO., LTD., established in 1978, is a Taiwan-based manufacturer with nearly 50 years of expertise in custom cold forged components and specialty...
TAIWAN
886-5-238 0959
886-5-238 1569
Soon Port International Co., Ltd. is Screw / Nail manufacturer and raw material wholesaler in Taiwan. We offer high quality fastener, and also high performance anti-corrosion coating screw. We can offer standard fasteners and also customized drawing fasteners with great quality and delivery time, Soon Port will be your best partner in fasteners.
Soon Port International Co., Ltd. is Screw / Nail manufacturer and raw material wholesaler in Taiwan. We offer high quality fastener, and also high performan...
TAIWAN
+886-6-5962101
+886-6-5962102
Feng Yi Titanium Screw has specialized in manufacturing titanium fasteners for over 15 years, exporting to more than 25 countries.
Feng Yi Titanium Screw has specialized in manufacturing titanium fasteners for over 15 years, exporting to more than 25 countries.
TAIWAN
886-6-590-1919
886-6-590-0309
SINTEC operates as an integrated company, established in 2012. We capitalize on the manufacturing expertise of screws and fixings within Taiwan, and manage the entire supply chain from material selection through to product design and delivery to sites across the globe. With the growing business, SINTEC have invested in the very latest laboratory testing equipment and achieved the internationally recognized ISO9001:2015 and CE standards to ensure the products we manufactured meet the correct standards. To meet the various applications in construction parts that required by our customers, we develop different types of products covering all possible usages. Within our production capacities we can offer all kind of construction screws, drywall screws, roofing screws, window screws, decking screws and concrete screws/bolts etc.
SINTEC operates as an integrated company, established in 2012. We capitalize on the manufacturing expertise of screws and fixings within Taiwan, and manage t...
TAIWAN
886-6-2538345
886-6-2542585
Gain Den Precision Co., Ltd.
Founded in Taiwan, Gain Den Precision Co., Ltd. is a professional manufacturer specializing in high-precision CNC turned components and custom fasteners. With years of manufacturing experience and a strong commitment to quality, we supply precision parts to customers worldwide, including Europe, North America, and Japan.
Our manufacturing capabilities include CNC Swiss-type turning, CNC turning, secondary machining, drilling, tapping, milling, and precision finishing. We produce both standard and custom-designed components according to customer drawings and specifications.
Our products are widely used in the automotive, industrial equipment, electronics, machinery, hydraulic, pneumatic, and medical-related industries. We process a wide range of materials, including carbon steel, stainless steel, aluminum, brass, copper alloys, titanium, and engineering plastics.
Gain Den operates more than 50 advanced CNC machines, allowing us to manufacture components ranging from Ø1 mm to Ø200 mm with consistent quality and reliable delivery. Whether for prototype development or high-volume production, we are committed to meeting our customers' expectations with competitive pricing, stable quality, and responsive service.
Quality is our highest priority. Our quality management system is certified to IATF 16949 and ISO 9001, ensuring strict process control and full traceability throughout production. We also provide comprehensive inspection reports, PPAP documentation, material certificates, and customized quality documentation upon request.
To meet diverse customer requirements, we offer a variety of surface treatments and value-added services, including zinc plating, zinc-nickel plating, black oxide, anodizing, electroless nickel plating, heat treatment, grinding, and assembly through qualified partners.
At Gain Den, we believe that long-term partnerships are built on trust, consistent quality, and professional communication. Our experienced engineering and sales teams work closely with customers from product development through mass production, providing technical support and efficient solutions to optimize manufacturability and reduce production costs.
We welcome OEM and ODM projects and look forward to becoming your reliable manufacturing partner for precision machining and custom fastener solutions.
Gain Den Precision Co., Ltd.
Founded in Taiwan, Gain Den Precision Co., Ltd. is a professional manufacturer specializing in high-precision CNC turned compone...
TAIWAN
886-5-237 7768
886-5-237 7996
Hsiung Jen industrial Co., Ltd. utilizes the auto multi-axis stamping and forming manufacturing technology, integrating with heat treatment and zinc aluminum coating processes to make a complete manufacturing chain. The wide range of the products with customization can meet one-stop shopping needs. Hsiung Jen is certified by IATF16949, ISO9001 and ISO14001. It supplies components to OEM/OES which including FOXTRON/LUXGEN, CHINA-MOTOR, PROTON, JIANGLING MOTORS and FORD, Tier 1, Tier 2 and AM market. The products of Hsiung Jen cover various fasteners for global automobile factories.
Hsiung Jen industrial Co., Ltd. utilizes the auto multi-axis stamping and forming manufacturing technology, integrating with heat treatment and zinc aluminum...
TAIWAN
886-6-3842857
886-6-3842855
STANDING was established in 1979. For over 47 years of Manufacturing & Exporting experiences, we specialized in Cold heading, Machining, Pressing & Plastic injection parts...etc. we have built full equipped laboratory and an excellent E.R.P. management system combined with T.Q.C. & 100% computerized effective office to supply quality products to our customers all over the world with long lasting Reputations & Honors.
PRODUCTS：MINI ELECTRONIC FASTENERS、COLD HEADING & MACHINING PARTS、SPECIAL FASTENERS、PRECISION TURNING PARTS.
MATERIAL：CARBON STEEL、ALLOY STEEL、STAINLESS STEEL、BRASS、ALUMINIUM、NYLON、PLASTIC…ETC.
PRODUCTION RANGE： DIAMETER 0.8~10.0mm，#000~3/8”, LENGTH 2.5~150.0mm，1/8”~6”
STANDARDS：ISO、ANSI、BS、DIN、JIS、CNS...ETC. AND CUSTOMERS’DESIGN
STANDING was established in 1979. For over 47 years of Manufacturing & Exporting experiences, we specialized in Cold heading, Machining, Pressing & P...
TAIWAN
886-6-7833380
886-6-7833733 , 886-6-7830733
HWA HSING SCREW INDUSTRY CO., LTD.
Founded in 1973, Hwa Hsing Screw Industry Co., Ltd. is a Taiwan-based manufacturer with over 50 years of expertise in precision fasteners. Our product range covers self-tapping screws, chipboard screws, self-drilling screws, deck screws, drywall screws, machine screws, and special screws — engineered to meet the demands of distributors, contractors, and OEMs worldwide. Visit our booth at the International Fastener Expo to discover our latest offerings and explore partnership opportunities. Your Demand, Our Motivation.
HWA HSING SCREW INDUSTRY CO., LTD.
Founded in 1973, Hwa Hsing Screw Industry Co., Ltd. is a Taiwan-based manufacturer with over 50 years of expertise in prec...
TAIWAN
886-8-7801044
886-8-7801034
We are a professional manufacturer of plastic fasteners, specializing in the production of plastic fasteners, plastic washers, nylon wall anchors, and other plastic components.
We are a professional manufacturer of plastic fasteners, specializing in the production of plastic fasteners, plastic washers, nylon wall anchors, and other ...
TAIWAN
886-7-6973939 , 886-7-6967721
886-7-6966666
Punches Tools: Square,Socket,6-lobes,Hex,12points,Piercing, Header,Recess,Extrusion,Ejector,Insert,Sleeve,K.O. Pin,Customized Punches. Dies & Forming Tools: Segment,Cutting,Trimming,Insert, Header Die,Open Die Set. Transfer Finger,Cutter,Holder,Collect, Spacer,Spring Clip,Customized Parts.
Punches Tools: Square,Socket,6-lobes,Hex,12points,Piercing, Header,Recess,Extrusion,Ejector,Insert,Sleeve,K.O. Pin,Customized Punches. Dies & Forming Too...
TAIWAN
886-7-6214882
886-7-6213761
Shin Guang Yin Enterprise Co. Ltd. is a professional ISO certificated manufacturer who has over 30 years" expericnces of producing special and custom-designed parts in Taiwan. Best services, quality and lead time are the most important factors we always care about. In order to achieve customer's different kinds of special request of
products, we also keep enhancing our developing ability as wcll. L.ooking forward to meeting with you at the show.
Shin Guang Yin Enterprise Co. Ltd. is a professional ISO certificated manufacturer who has over 30 years" expericnces of producing special and custom-de...
TAIWAN
886-7-6213333
886-7-6212266
KIND-AUSPICE INDUSTRAL CO., LTD was established in 1993, located in screw town – Kangshan, Kaohsiung, Taiwan.
Our major products are raw material of steel, wire rod, steel wire, screw, fastener, bit, forming tooling, which could be applied in construction, engineering, furniture, and automobile industry. With great effort of General Manager - Cooper Tsai, and all staffs, the company upscale day by day, which have now been plunged into global market to approximately more than 100 customers in 30 countries. The top 3 export area is North America, South America, and Europe. Our turnover is about eighteen million US dollars annually. We continually develop new products and promote Taiwan fasteners sto the world.
For expanding the business, we relocated to a new plant at Bihong St. Kangshan Dist. Kaohsiung City. The new plant has extensive space, including marketing department, production management department, and quality control department. Establishing logistic warehouse area, following up the latest industry progress, and improving all operation progress provide better services. Besides, we purchase variety of inspection instrument, and professional print design software and hardware to control quality for customers.
KIND-AUSPICE INDUSTRAL CO., LTD was established in 1993, located in screw town – Kangshan, Kaohsiung, Taiwan.
Our major products are raw material of steel, w...
TAIWAN
886-7-632 0199
886-7-632 1866
With approx. 6,700m2 of covered area, DeXin Metal (Wei I group) is supported by technical staffs ready to react quickly and effectively to any request, we have been a supplier of standard and custom screws since 2015 and have provided our customers with unsurpassed quality and service since then. We have a qualify Lab in house and strict quality control policy to do in-process and final inspection.
TAIWAN
886-6-596 1234 , 886-6-583 5985
886-6-596 1300
Wingtone is a leading manufacturer of precision cold forming components in Taiwan, supplying its products mainly to the automotive industry.
Over 40 years of mass-production experience. We are certified with ISO 9001, IATF 16949, and ISO/IEC 17025.
Steel material: C1008 ~ C1035, SCM415~ SCM435;
Aluminum material: 6061, 6082
Production capability: Max. Length: 130mm / Max. OD: 80mm.
Applications: mainly to the automotive industry.
Wingtone is a leading manufacturer of precision cold forming components in Taiwan, supplying its products mainly to the automotive industry.
Over 40 years of...
TAIWAN
886-6-2679960
886-6-2670107
1.Member count: 313 members as of March.31,2016. Among them, 25 % are manufacturing traders, 70 % are pure manufacturers, and 5 % are pure traders.
2. Operating performance:Approximate 3000 millions USD annually.
3. Overseas Investment: 28 % of the members have invested in China, Thailand, Malaysia, Vietnam, and other regions..
4. Committees:International Committee, Member Committee, and Training Committee.
1.Member count: 313 members as of March.31,2016. Among them, 25 % are manufacturing traders, 70 % are pure manufacturers, and 5 % are pure traders.
2. Operat...
TAIWAN
886-7-2233586 , 886-7-2243108
886-7-2245718 , 886-7-2243234
Mechanical Hardwares have being in Cold Forged especial in Multi procession Fasteners exporting in Taiwan since 1985.
We get great reputation by Strong Production Facility, Good Parts Quality and Competitive price by our customers.
Less quantity with multi design parts are workable in our line.
Try us and you will be satisfied by our offers.
TAIWAN
886-7-6119999 Ctn: Arthur Tsai , alpro.metals@msa.hinet.net
886-7-3515396 , 886-7-6121096
AL-Pro Metals Co., Ltd. was established in 1994. The leading manufacturer of various kinds of fasteners, screws, nuts, bolts and washers with stainless steel, carbon steel, brass and aluminium alloy. We offer various fasteners worldwide. Real good buys here!
With over 30 years of experience, AL-PRO provides various high-quality fasteners, automotive screw, bolts, screws and nuts, and other special-specification hardware accessories. Thanks to our insistence on quality first, competitive prices, punctual delivery and sincere service to satisfy global clients, we are obtaining a prestigious reputation as a world-class manufacturer. If you are interested, feel free to call or send an email if you would like to get more information about AL-PRO.
AL-Pro Metals Co., Ltd. was established in 1994. The leading manufacturer of various kinds of fasteners, screws, nuts, bolts and washers with stainless steel...
TAIWAN
886-7-6967166
886-7-6961794
Since 1974, Wa Tai Industrial has been a leading cold-forged fastener manufacturer in Taiwan. We provide one-stop OEM fastening solutions for the construction, industrial, automotive, electronics, and machinery industries.
Since 1974, Wa Tai Industrial has been a leading cold-forged fastener manufacturer in Taiwan. We provide one-stop OEM fastening solutions for the constructio...
TAIWAN
886-7-695-2505
886-7-695-2510
We are a long-establised fastener manufacturer in Taiwan. We trust that our service will meet your need with satisfaction.
TAIWAN
886-2-25776800
886-2-25779555
Your Partner in Fastener Tooling & Machinery
KONFU Enterprise Co., Ltd. is a leading manufacturer and supplier of fastener forming tools and cold forming machinery, with a rich history of excellence since 1975. Our core mission is to provide comprehensive solutions that solve complex challenges for our clients, helping their businesses flourish. With over 50 years of deep industry experience, we serve a global clientele across key markets including Germany, the USA, Japan, and India. Our expertise extends beyond manufacturing to include profound insights in know-how, custom design capabilities, and integrated supply chain management. We are committed to quality, as demonstrated by our ISO 9001 certification, and to social responsibility, embodying our founding principle of returning happiness to society.
Your Partner in Fastener Tooling & Machinery
KONFU Enterprise Co., Ltd. is a leading manufacturer and supplier of fastener forming tools and cold forming...
TAIWAN
886-7-6246911
886-7-6246913
ECONOMIC DEVELOPMENT BUREAU,KAOHSIUNG CITY GOVERNMENT / TAIWAN INDUSTRIAL FASTENERS INSTITUTE
ECONOMIC DEVELOPMENT BUREAU,KAOHSIUNG CITY GOVERNMENT / TAIWAN INDUSTRIAL FASTENERS INSTITUTE
TAIWAN
886-4-23508088
886-4-23501001
YOKE Industrial Corp. is a global leader in industrial lifting safety equipment. Driven by safety digitalization, YOKE integrates advanced RFID technology and Digital Product Passport (DPP) solutions aligned with EU ESPR regulations. Combined with our RiConnect asset management software, we deliver smart, sustainable, and fully compliant lifting solutions worldwide.
YOKE Industrial Corp. is a global leader in industrial lifting safety equipment. Driven by safety digitalization, YOKE integrates advanced RFID technology an...
TAIWAN
886-3-4534866
886-3-4532499
Founded in 2007, HI LINK INDUSTRIAL CO. LTD. is a professional manufacturer in the stainless steel screws. We not only specialize in manufacturing products to the international specifications but also are skillful in the development of special customized stainless steel screws. Our founder is a technician who is very familiar with the manufacturing process of stainless steel screws. With the rich experience, we have developed into a factory capable to supply diversified products with the competitive price, superior quality and service.
Founded in 2007, HI LINK INDUSTRIAL CO. LTD. is a professional manufacturer in the stainless steel screws. We not only specialize in manufacturing products t...
TAIWAN
886-7-6075595
886-7-6075596
WEI-I Industry Co., Ltd. is a Taiwan-based manufacturer specializing in custom cold- and warm-forged nuts since 1987. We provide engineered fastening solutions for customers in the automotive and industrial markets, helping transform complex designs into reliable, cost-effective production solutions.
Certified to IATF 16949 and ISO 14001, WEI-I also operates an ISO/IEC 17025-accredited laboratory to support quality assurance and product validation. Our commitment to quality, engineering, and continuous improvement has made us a trusted manufacturing partner for customers worldwide.
We specialize in the production of non-standard nuts manufactured entirely in-house through cold and warm forging. Equipped with 41 multi-station nut formers, in-house tooling design capabilities, and comprehensive secondary processing resources, we provide stable, high-volume production while maintaining the flexibility required for complex custom components.
We develop tailored nut solutions based on each customer's dimensional, mechanical, and functional requirements. From customer drawings to finished products, our engineering team combines tooling design, cold and warm forming, precision machining, heat treatment, surface finishing, and quality control to deliver products optimized for functionality, manufacturability, dimensional accuracy, and cost efficiency.
With more than 35 years of manufacturing experience, a 10,000 m² production facility, and a highly experienced engineering and quality team, WEI-I is committed to providing responsive technical support, dependable quality, and reliable delivery—from prototype development through mass production.
Capability range:
✔ Ø12x18L to Ø56x120L
✔ M3 to M36
✔ #6 to 1 1/4”
Available material types:
✔ Carbon steel
✔ Stainless steel
✔ Brass
✔ Aluminum
If you are looking for a reliable manufacturing partner for custom-engineered nuts and fastening components, WEI-I is ready to support your next project.
WEI-I Industry Co., Ltd. is a Taiwan-based manufacturer specializing in custom cold- and warm-forged nuts since 1987. We provide engineered fastening solutio...
TAIWAN
886-4-7582765
886-4-7582786
K.S. Terminals Inc. is a global manufacturer of high-quality electrical terminals, automotive connectors, battery modular connectors (BMC) and EV Charging Connectors. KST was first established in Changhua, Taiwan in 1973 and has become known for its excellence in connector solutions. It has achieved this by leveraging its expertise in precision mold design, cold press stamping, and injection molding – our core technologies.
KST specializes in electrical terminals such as Ring, Spade and Disconnects. Our termination category carry numerous certifications mainly UL, cUL, CSA. We can also design customized terminals to meet client's requirements. Due to reliability and ease of use, Electrical terminals are popular in automotive and industrial fields.
KST lugs utilize high-conductivity copper materials and are tin plated, providing excellent resistance to environments. They are suitable for high-voltage and high-current environments, and found in communication stations, power storage systems, and various electrical equipment. This series of copper lugs comes in a comprehensive range of sizes and specifications, all meeting UL486 standards and certified by UL.
Wire accessories have become an essential component for cable managements. KST Nylon Cable tie provide convenient bundling functionality while stainless cable ties works wonders in extreme environments. Cable ties are widely used in various fields, including consumer goods, industrial machinery, and even construction.
KST automotive connectors is designed with a strong emphasis on reliability. They undergo rigorous testing to ensure power and signal transmission under extreme conditions. These robust automotive connectors are specifically designed to withstand harsh conditions on highways and off-road environments.
KST BMC and ESS is a versatile connector designed for establishing connections between power sources. They are essentials in renewable energy and can be found in numerous applications including UPS systems, Testing Equipment, and Energy Storage Solutions. BMC and ESS connectors, utilized in high powered settings, are meticulously designed to offer maximum protection.
Both products are UL certified. ESS is also TUV certified.
K.S. Terminals Inc. is a global manufacturer of high-quality electrical terminals, automotive connectors, battery modular connectors (BMC) and EV Charging Co...
TAIWAN
886-2-27299089
886-2-27295969
Joust Far East co., Ltd was founded in 1988. We specialize in precision machine parts, casting and processing services. Our dewaxing casting and metal processing factory is certified to ISO 9001:2015.
We focus on core components of high-precision equipment, including semiconductors, solar, automation, manipulators, fastener forming machines and medical equipment and so on.
Over the years, in terms of quality, accuracy, supply stability and delivery, we win a high admiration and are widely trusted by customers in the United States, Japan, etc. At present, we have a long-term cooperation with Japan manufacturers who are well-known for cold header, machine tool, steel bending machine and steel bar cutting machine.
Henceforth, we will continuously provide high-precision, high-quality and stable manufacturing services and cooperate with major machinery and equipment manufacturers. Our production line is flexible and diversified. We accept small amount of diversity and customize machine parts according to customers' drawings.
Joust Far East co., Ltd was founded in 1988. We specialize in precision machine parts, casting and processing services. Our dewaxing casting and metal proces...
TAIWAN
886-7-6281121
886-7-6281135
Hong Yuan PM excels in plastic injection manufacturing with strong technical expertise and dedicated service. Supporting both OEM and ODM, we go the extra mile to deliver top-quality plastic containers and total customer satisfaction.
We offer heavy-duty, patented PP boxes designed for screws and fasteners-featuring custom compartments, stackable, anti-slip, and hanging-hole structures. Fully RoHS compliant, our products are ideal for automated lines and global export.
Hong Yuan PM excels in plastic injection manufacturing with strong technical expertise and dedicated service. Supporting both OEM and ODM, we go the extra mi...
TAIWAN
886-2-2668-6923
886-2668-7013
Foss Reach Manufacturing Co., Ltd. was established in 1988. Initially, we engaged in contract manufacturing for computer equipment, thermal management components, and precision parts for automobiles and heavy motorcycles; our excellent stamping technology attracted clients from around the world to Taiwan for collaboration.
After the turn of the millennium, our company expanded into the hand tool industry, establishing OEM and ODM partnerships. Due to the superior quality of products "100% Made in Taiwan," we earned widespread client trust and was commissioned to manufacture hand tools such as cable strippers and terminal crimping pliers.
Years of capacity building and accumulated experience, we established our own brand-Foss Reach, and obtained German GS VPA certification; our products are marketed in over 40 countries across Europe, America, Asia and Oceania, earning high recognition from our regular customers worldwide.
Foss Reach Manufacturing Co., Ltd. was established in 1988. Initially, we engaged in contract manufacturing for computer equipment, thermal management compon...
TAIWAN
886-4-7613830
886-4-7522637
Yi Shih Enterprise Co., Ltd. , established in June 1995, is a professional screw processing and manufacturing plant. Through the efforts of all employees, the company's image and product quality have been widely recognized by the market, establishing a strong reputation. The company's processing and manufacturing plant utilizes state-of-the-art automated equipment; this enhances personnel quality and productivity, increases international competitiveness, and continues its commitment to quality and excellent service, meeting market demands.
Yi Shih Enterprise Co., Ltd. , established in June 1995, is a professional screw processing and manufacturing plant. Through the efforts of all employees, th...
TAIWAN
886-4-7874565
886-4-7874465
E-MARK is specialized in Hand Tools, Metalworking, Plastic Injection, and OEM/ODM Solutions.
E-MARK is specialized in Hand Tools, Metalworking, Plastic Injection, and OEM/ODM Solutions.
TAIWAN
886-7-5507261
886-7-5507262
Elevate International is a proud family business, built on a foundation of trust, dedication, and integrity. With over two decades of experience in the fastener industry, we have established ourselves as a leading provider of high-quality products. Our commitment to innovation, exceptional customer service, and strong market reach has allowed us to build long-term partnerships with clients across various sectors.
As a family-owned business, we understand the importance of personalized service and attention to detail, ensuring that each customer feels valued and supported. Choose us for reliable, innovative fastener solutions delivered with a personal touch.
Elevate International is a proud family business, built on a foundation of trust, dedication, and integrity. With over two decades of experience in the faste...
TAIWAN
886-4-7690612
886-4-7682612
Shun Yui Industrial Co., Ltd. established in 1988, makes efforts in research and development of car and motorcycle bushing, chassis components, structure steel pipes and special steel pipes. We provide our customers with the high-quality products and fast delivery by taking advantage of our high-tech facilities and by following the strict production flow chart. We commit to provide the best service to our customers.
Shun Yui Industrial Co., Ltd. established in 1988, makes efforts in research and development of car and motorcycle bushing, chassis components, structure ste...