(Forgot your password?)?
News 

SMAC's Robotic Screwdriver Capable of M0.6-M1.6

SMAC_Screwdriver_a5519_0.png
Add to my favorite
2017-07-18

SMAC Moving Coil Actuators has launched sales of Z-theta linear rotary actuators capable of automated assembly of small screws, size range M0.6-M1.6, with real-time feedback on the process. The "robotic screwdriver" could be used to automate micro-screw drilling, tapping, thread check, and screw tightening. SMAC predicts that the smart screwdriver is a breakthrough for assembling precise products such as medical/implantable devices and wearable devices that require sub millimeter screw (M0.6). 

Small screw driving is mostly a manual operation today. Major quality problems are cross threading and/or too much torque (which breaks the screw). These problems are overcome by the SMAC solution. The SMAC solution is especially useful for M1.6 or smaller micro screw assembly as this size is outside human worker assembly limits.

The benefits of the screwdriver include: the ability to move a small screw - as small as M0.6 - to the tapped hole and perform a Soft-Land routine, the ability to engage screw-threads and hole-threads to prevent cross threading, the ability to screw into threads with programmed torque, the ability to check number of turns and depth, the ability to "snug" screw when required, the ability to set programmed final torque and verify movement after this torque is applied. 

扣件
國際展會
惠達雜誌
匯達實業
外銷媒合
廣告刊登
螺絲五金
五金工具
紧固件
台灣扣件展
印度新德里螺絲展
越南河內螺絲展
墨西哥瓜達拉哈拉螺絲展
美國拉斯維加斯螺絲暨機械設備展
波蘭克拉科夫螺絲展
義大利米蘭螺絲展
德國司徒加特螺絲展
FAIR INDIA
FASTENER FAIR VIETNAM
FASTENER FAIR MEXICO
FASTENER POLAND
FASTENER FAIR ITALY
FASTENER FAIR GLOBAL
FASTENER WORLD
Save and share
 
 
READ NEXT

Subscribe