MiTek® Launches New ProSeries™ Fasteners

MiTek ProSeries fasteners feature a “cut point” that offers a fast start – with no pre-drilling required – that helps reduce installation torque and splitting.

• Ideal for wood-to-wood and metal-to wood connections, MiTek Hex Head structural wood screws are available in lengths from 1-1/2” to 8”. These screws can be used in numerous framing applications in lieu of traditional lags screws where a hex head drive is desired.
  
  
• MiTek Washer Head structural wood screws (exterior finish) offer an alternative to traditional lags screws. The large, flat washer head offers a low profile (for less interference) after installation. These screws are ideal for deck ledger attachments and other wood-to-wood connections. They are available in lengths from 2-7/8” to 8.”
  
  
• Specifically designed for multi-ply EWP and dimensional wood connections, MiTek Washer Head structural wood screws (with a yellow zinc finish) allow for one-sided connections on 2-, 3-, and 4-ply beams and truss girders. They are available in lengths from 2-7/8” to 6-3/4”.
  
  
• Ideal for a low-profile appearance, MiTek Bugle Head screws are available in lengths from 2-1/2” to 10”. These are general-purpose structural screws that offers a high-strength alternative to traditional lag screws and allow for the head to be driven flush or countersunk.

Screw lengths are stamped on the head of all MiTek ProSeries structural wood screws. This is ideal during the inspection process. The MiTek Washer Head structural wood screws and the MiTek Bugle Head structural wood screws both utilize a T30 Torx drive to maximize bit engagement and reduce “cam-out.”